** Description changed: The regular expressions used in /etc/network/if-post-down.d/vlan and /etc/network/if-pre-up.d/vlan do not match the name of my network card enp4s0f0. This can be fixed by broadening the regular expression. + + This is only a problem when the device is a vlan device! See below. if-pre-up: #!/bin/sh # Most of this stuff is to enable vlans case "$IFACE" in - # Ignore any alias (#272891) which uses <interface>:<alabel> - *:*) - exit 0 - ;; - vlan0*) - vconfig set_name_type VLAN_PLUS_VID - VLANID=`echo $IFACE|sed "s/vlan0*//"` - ;; - vlan*) - vconfig set_name_type VLAN_PLUS_VID_NO_PAD - VLANID=`echo $IFACE|sed "s/vlan0*//"` - ;; - eth*.0*|bond*.0*|wlan*.0*|em*.0*|p[0-9]*.0*|enp[0-9]*.0*) - vconfig set_name_type DEV_PLUS_VID - VLANID=`echo $IFACE|sed "s/eth[0-9][0-9]*\.0*//g;s/bond[0-9][0-9]*\.0*//g;s/wlan[0-9][0-9]*\.0*//g;s/em[0-9][0-9]*\.0*//g;s/p[0-9][0-9]*\(p[0-9][0-9]*\)\?\(_[0-9][0-9]*\)\?\.0*//g;s/enp[0-9]s[0-9]f[0-9]\.0*//g"` - IF_VLAN_RAW_DEVICE=`echo $IFACE|sed "s/\(eth[0-9][0-9]*\)\..*/\1/;s/\(bond[0-9][0-9]*\)\..*/\1/;s/\(wlan[0-9][0-9]*\)\..*/\1/;s/\(em[0-9][0-9]*\)\..*/\1/;s/\(p[0-9][0-9]*\(p[0-9][0-9]*\)\?\(_[0-9][0-9]*\)\?\)\..*/\1/;s/\(enp[0-9]s[0-9]f[0-9]\)\..*/\1/"` - ;; - eth*.*|bond*.*|wlan*.*|em*.*|p[0-9]*.*|enp[0-9]*.*) - vconfig set_name_type DEV_PLUS_VID_NO_PAD - VLANID=`echo $IFACE|sed "s/eth[0-9][0-9]*\.0*//g;s/bond[0-9][0-9]*\.0*//g;s/wlan[0-9][0-9]*\.0*//g;s/em[0-9][0-9]*\.0*//g;s/p[0-9][0-9]*\(p[0-9][0-9]*\)\?\(_[0-9][0-9]*\)\?\.0*//g;s/enp[0-9]s[0-9]f[0-9]\.//g"` - IF_VLAN_RAW_DEVICE=`echo $IFACE|sed "s/\(eth[0-9][0-9]*\)\..*/\1/;s/\(bond[0-9][0-9]*\)\..*/\1/;s/\(wlan[0-9][0-9]*\)\..*/\1/;s/\(em[0-9][0-9]*\)\..*/\1/;s/\(p[0-9][0-9]*\(p[0-9][0-9]*\)\?\(_[0-9][0-9]*\)\?\)\..*/\1/;s/\(enp[0-9]s[0-9]f[0-9]\)\..*/\1/"` - ;; - *.0*) - # Silently ignore interfaces which we do not (know how to) support - [ -z "$IF_VLAN_RAW_DEVICE" ] && exit 0 - vconfig set_name_type DEV_PLUS_VID - VLANID=`echo $IFACE|sed "s/[^.]*\.0*//g"` - ;; - *.*) - # Silently ignore interfaces which we do not (know how to) support - [ -z "$IF_VLAN_RAW_DEVICE" ] && exit 0 - vconfig set_name_type DEV_PLUS_VID_NO_PAD - VLANID=`echo $IFACE|sed "s/[^.]*\.0*//g"` - ;; + # Ignore any alias (#272891) which uses <interface>:<alabel> + *:*) + exit 0 + ;; + vlan0*) + vconfig set_name_type VLAN_PLUS_VID + VLANID=`echo $IFACE|sed "s/vlan0*//"` + ;; + vlan*) + vconfig set_name_type VLAN_PLUS_VID_NO_PAD + VLANID=`echo $IFACE|sed "s/vlan0*//"` + ;; + eth*.0*|bond*.0*|wlan*.0*|em*.0*|p[0-9]*.0*|enp[0-9]*.0*) + vconfig set_name_type DEV_PLUS_VID + VLANID=`echo $IFACE|sed "s/eth[0-9][0-9]*\.0*//g;s/bond[0-9][0-9]*\.0*//g;s/wlan[0-9][0-9]*\.0*//g;s/em[0-9][0-9]*\.0*//g;s/p[0-9][0-9]*\(p[0-9][0-9]*\)\?\(_[0-9][0-9]*\)\?\.0*//g;s/enp[0-9]s[0-9]f[0-9]\.0*//g"` + IF_VLAN_RAW_DEVICE=`echo $IFACE|sed "s/\(eth[0-9][0-9]*\)\..*/\1/;s/\(bond[0-9][0-9]*\)\..*/\1/;s/\(wlan[0-9][0-9]*\)\..*/\1/;s/\(em[0-9][0-9]*\)\..*/\1/;s/\(p[0-9][0-9]*\(p[0-9][0-9]*\)\?\(_[0-9][0-9]*\)\?\)\..*/\1/;s/\(enp[0-9]s[0-9]f[0-9]\)\..*/\1/"` + ;; + eth*.*|bond*.*|wlan*.*|em*.*|p[0-9]*.*|enp[0-9]*.*) + vconfig set_name_type DEV_PLUS_VID_NO_PAD + VLANID=`echo $IFACE|sed "s/eth[0-9][0-9]*\.0*//g;s/bond[0-9][0-9]*\.0*//g;s/wlan[0-9][0-9]*\.0*//g;s/em[0-9][0-9]*\.0*//g;s/p[0-9][0-9]*\(p[0-9][0-9]*\)\?\(_[0-9][0-9]*\)\?\.0*//g;s/enp[0-9]s[0-9]f[0-9]\.//g"` + IF_VLAN_RAW_DEVICE=`echo $IFACE|sed "s/\(eth[0-9][0-9]*\)\..*/\1/;s/\(bond[0-9][0-9]*\)\..*/\1/;s/\(wlan[0-9][0-9]*\)\..*/\1/;s/\(em[0-9][0-9]*\)\..*/\1/;s/\(p[0-9][0-9]*\(p[0-9][0-9]*\)\?\(_[0-9][0-9]*\)\?\)\..*/\1/;s/\(enp[0-9]s[0-9]f[0-9]\)\..*/\1/"` + ;; + *.0*) + # Silently ignore interfaces which we do not (know how to) support + [ -z "$IF_VLAN_RAW_DEVICE" ] && exit 0 + vconfig set_name_type DEV_PLUS_VID + VLANID=`echo $IFACE|sed "s/[^.]*\.0*//g"` + ;; + *.*) + # Silently ignore interfaces which we do not (know how to) support + [ -z "$IF_VLAN_RAW_DEVICE" ] && exit 0 + vconfig set_name_type DEV_PLUS_VID_NO_PAD + VLANID=`echo $IFACE|sed "s/[^.]*\.0*//g"` + ;; - *) - exit 0 - ;; + *) + exit 0 + ;; esac if [ -n "$IF_VLAN_RAW_DEVICE" ] && [ ! -d /sys/class/net/$IFACE ]; then - if [ ! -x /sbin/vconfig ]; then - exit 0 - fi - if ! ip link show dev "$IF_VLAN_RAW_DEVICE" > /dev/null; then - echo "$IF_VLAN_RAW_DEVICE does not exist, unable to create $IFACE" - exit 1 - fi - if [ ! -e "/sys/class/net/$IFACE" ]; then - ip link set up dev $IF_VLAN_RAW_DEVICE - vconfig add $IF_VLAN_RAW_DEVICE $VLANID - fi + if [ ! -x /sbin/vconfig ]; then + exit 0 + fi + if ! ip link show dev "$IF_VLAN_RAW_DEVICE" > /dev/null; then + echo "$IF_VLAN_RAW_DEVICE does not exist, unable to create $IFACE" + exit 1 + fi + if [ ! -e "/sys/class/net/$IFACE" ]; then + ip link set up dev $IF_VLAN_RAW_DEVICE + vconfig add $IF_VLAN_RAW_DEVICE $VLANID + fi fi # This is not vlan specific, and should actually go somewhere else. if [ -n "$IF_HW_MAC_ADDRESS" ]; then - ip link set $IFACE address $IF_HW_MAC_ADDRESS + ip link set $IFACE address $IF_HW_MAC_ADDRESS fi - if-post-down: #!/bin/sh # If IFACE is an automagic vlan interface (without the vlan-raw-device # parameter) then let's try to discover the magic here.. Another way would be # to just probe for the right device name in /proc/net/vlan case "$IFACE" in - # Ignore any alias (#272891) - *:*) - exit 0 - ;; - eth*.0*|bond*.0*|wlan*.0*|em*.0*|p[0-9]*.0*|enp[0-9]*\.0*) - IF_VLAN_RAW_DEVICE=`echo $IFACE|sed "s/\(eth[0-9][0-9]*\)\..*/\1/;s/\(bond[0-9][0-9]*\)\..*/\1/;s/\(wlan[0-9][0-9]*\)\..*/\1/;s/\(em[0-9][0-9]*\)\..*/\1/;s/\(p[0-9][0-9]*\(p[0-9][0-9]*\)\?\(_[0-9][0-9]*\)\?\)\..*/\1/"` - ;; - eth*.*|bond*.*|wlan*.*|em*.*|p[0-9]*.*|enp[0-9]*\.*) - IF_VLAN_RAW_DEVICE=`echo $IFACE|sed "s/\(eth[0-9][0-9]*\)\..*/\1/;s/\(bond[0-9][0-9]*\)\..*/\1/;s/\(wlan[0-9][0-9]*\)\..*/\1/;s/\(em[0-9][0-9]*\)\..*/\1/;s/\(p[0-9][0-9]*\(p[0-9][0-9]*\)\?\(_[0-9][0-9]*\)\?\)\..*/\1/"` - ;; - # Test for vlan raw device (#196890, #292648) - *) - [ -z "$IF_VLAN_RAW_DEVICE" ] && exit 0 - ;; + # Ignore any alias (#272891) + *:*) + exit 0 + ;; + eth*.0*|bond*.0*|wlan*.0*|em*.0*|p[0-9]*.0*|enp[0-9]*\.0*) + IF_VLAN_RAW_DEVICE=`echo $IFACE|sed "s/\(eth[0-9][0-9]*\)\..*/\1/;s/\(bond[0-9][0-9]*\)\..*/\1/;s/\(wlan[0-9][0-9]*\)\..*/\1/;s/\(em[0-9][0-9]*\)\..*/\1/;s/\(p[0-9][0-9]*\(p[0-9][0-9]*\)\?\(_[0-9][0-9]*\)\?\)\..*/\1/"` + ;; + eth*.*|bond*.*|wlan*.*|em*.*|p[0-9]*.*|enp[0-9]*\.*) + IF_VLAN_RAW_DEVICE=`echo $IFACE|sed "s/\(eth[0-9][0-9]*\)\..*/\1/;s/\(bond[0-9][0-9]*\)\..*/\1/;s/\(wlan[0-9][0-9]*\)\..*/\1/;s/\(em[0-9][0-9]*\)\..*/\1/;s/\(p[0-9][0-9]*\(p[0-9][0-9]*\)\?\(_[0-9][0-9]*\)\?\)\..*/\1/"` + ;; + # Test for vlan raw device (#196890, #292648) + *) + [ -z "$IF_VLAN_RAW_DEVICE" ] && exit 0 + ;; esac if [ ! -x /sbin/vconfig ]; then - exit 0 + exit 0 fi vconfig rem $IFACE
** Summary changed: - ifup and ifdown dont work when ethernet device name does not meet regular conventions + ifup and ifdown dont work for vlan devices when raw ethernet device name does not meet regular conventions ** Description changed: The regular expressions used in /etc/network/if-post-down.d/vlan and /etc/network/if-pre-up.d/vlan do not match the name of my network card enp4s0f0. This can be fixed by broadening the regular expression. This is only a problem when the device is a vlan device! - See below. + See below for the fix that worked on my system. if-pre-up: #!/bin/sh # Most of this stuff is to enable vlans case "$IFACE" in # Ignore any alias (#272891) which uses <interface>:<alabel> *:*) exit 0 ;; vlan0*) vconfig set_name_type VLAN_PLUS_VID VLANID=`echo $IFACE|sed "s/vlan0*//"` ;; vlan*) vconfig set_name_type VLAN_PLUS_VID_NO_PAD VLANID=`echo $IFACE|sed "s/vlan0*//"` ;; eth*.0*|bond*.0*|wlan*.0*|em*.0*|p[0-9]*.0*|enp[0-9]*.0*) vconfig set_name_type DEV_PLUS_VID VLANID=`echo $IFACE|sed "s/eth[0-9][0-9]*\.0*//g;s/bond[0-9][0-9]*\.0*//g;s/wlan[0-9][0-9]*\.0*//g;s/em[0-9][0-9]*\.0*//g;s/p[0-9][0-9]*\(p[0-9][0-9]*\)\?\(_[0-9][0-9]*\)\?\.0*//g;s/enp[0-9]s[0-9]f[0-9]\.0*//g"` IF_VLAN_RAW_DEVICE=`echo $IFACE|sed "s/\(eth[0-9][0-9]*\)\..*/\1/;s/\(bond[0-9][0-9]*\)\..*/\1/;s/\(wlan[0-9][0-9]*\)\..*/\1/;s/\(em[0-9][0-9]*\)\..*/\1/;s/\(p[0-9][0-9]*\(p[0-9][0-9]*\)\?\(_[0-9][0-9]*\)\?\)\..*/\1/;s/\(enp[0-9]s[0-9]f[0-9]\)\..*/\1/"` ;; eth*.*|bond*.*|wlan*.*|em*.*|p[0-9]*.*|enp[0-9]*.*) vconfig set_name_type DEV_PLUS_VID_NO_PAD VLANID=`echo $IFACE|sed "s/eth[0-9][0-9]*\.0*//g;s/bond[0-9][0-9]*\.0*//g;s/wlan[0-9][0-9]*\.0*//g;s/em[0-9][0-9]*\.0*//g;s/p[0-9][0-9]*\(p[0-9][0-9]*\)\?\(_[0-9][0-9]*\)\?\.0*//g;s/enp[0-9]s[0-9]f[0-9]\.//g"` IF_VLAN_RAW_DEVICE=`echo $IFACE|sed "s/\(eth[0-9][0-9]*\)\..*/\1/;s/\(bond[0-9][0-9]*\)\..*/\1/;s/\(wlan[0-9][0-9]*\)\..*/\1/;s/\(em[0-9][0-9]*\)\..*/\1/;s/\(p[0-9][0-9]*\(p[0-9][0-9]*\)\?\(_[0-9][0-9]*\)\?\)\..*/\1/;s/\(enp[0-9]s[0-9]f[0-9]\)\..*/\1/"` ;; *.0*) # Silently ignore interfaces which we do not (know how to) support [ -z "$IF_VLAN_RAW_DEVICE" ] && exit 0 vconfig set_name_type DEV_PLUS_VID VLANID=`echo $IFACE|sed "s/[^.]*\.0*//g"` ;; *.*) # Silently ignore interfaces which we do not (know how to) support [ -z "$IF_VLAN_RAW_DEVICE" ] && exit 0 vconfig set_name_type DEV_PLUS_VID_NO_PAD VLANID=`echo $IFACE|sed "s/[^.]*\.0*//g"` ;; *) exit 0 ;; esac if [ -n "$IF_VLAN_RAW_DEVICE" ] && [ ! -d /sys/class/net/$IFACE ]; then if [ ! -x /sbin/vconfig ]; then exit 0 fi if ! ip link show dev "$IF_VLAN_RAW_DEVICE" > /dev/null; then echo "$IF_VLAN_RAW_DEVICE does not exist, unable to create $IFACE" exit 1 fi if [ ! -e "/sys/class/net/$IFACE" ]; then ip link set up dev $IF_VLAN_RAW_DEVICE vconfig add $IF_VLAN_RAW_DEVICE $VLANID fi fi # This is not vlan specific, and should actually go somewhere else. if [ -n "$IF_HW_MAC_ADDRESS" ]; then ip link set $IFACE address $IF_HW_MAC_ADDRESS fi if-post-down: #!/bin/sh # If IFACE is an automagic vlan interface (without the vlan-raw-device # parameter) then let's try to discover the magic here.. Another way would be # to just probe for the right device name in /proc/net/vlan case "$IFACE" in # Ignore any alias (#272891) *:*) exit 0 ;; eth*.0*|bond*.0*|wlan*.0*|em*.0*|p[0-9]*.0*|enp[0-9]*\.0*) IF_VLAN_RAW_DEVICE=`echo $IFACE|sed "s/\(eth[0-9][0-9]*\)\..*/\1/;s/\(bond[0-9][0-9]*\)\..*/\1/;s/\(wlan[0-9][0-9]*\)\..*/\1/;s/\(em[0-9][0-9]*\)\..*/\1/;s/\(p[0-9][0-9]*\(p[0-9][0-9]*\)\?\(_[0-9][0-9]*\)\?\)\..*/\1/"` ;; eth*.*|bond*.*|wlan*.*|em*.*|p[0-9]*.*|enp[0-9]*\.*) IF_VLAN_RAW_DEVICE=`echo $IFACE|sed "s/\(eth[0-9][0-9]*\)\..*/\1/;s/\(bond[0-9][0-9]*\)\..*/\1/;s/\(wlan[0-9][0-9]*\)\..*/\1/;s/\(em[0-9][0-9]*\)\..*/\1/;s/\(p[0-9][0-9]*\(p[0-9][0-9]*\)\?\(_[0-9][0-9]*\)\?\)\..*/\1/"` ;; # Test for vlan raw device (#196890, #292648) *) [ -z "$IF_VLAN_RAW_DEVICE" ] && exit 0 ;; esac if [ ! -x /sbin/vconfig ]; then exit 0 fi vconfig rem $IFACE ** Package changed: biosdevname (Ubuntu) => ifupdown (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ifupdown in Ubuntu. https://bugs.launchpad.net/bugs/1628591 Title: ifup and ifdown dont work for vlan devices when raw ethernet device name does not meet regular conventions Status in ifupdown package in Ubuntu: New Bug description: The regular expressions used in /etc/network/if-post-down.d/vlan and /etc/network/if-pre-up.d/vlan do not match the name of my network card enp4s0f0. This can be fixed by broadening the regular expression. This is only a problem when the device is a vlan device! See below for the fix that worked on my system. if-pre-up: #!/bin/sh # Most of this stuff is to enable vlans case "$IFACE" in # Ignore any alias (#272891) which uses <interface>:<alabel> *:*) exit 0 ;; vlan0*) vconfig set_name_type VLAN_PLUS_VID VLANID=`echo $IFACE|sed "s/vlan0*//"` ;; vlan*) vconfig set_name_type VLAN_PLUS_VID_NO_PAD VLANID=`echo $IFACE|sed "s/vlan0*//"` ;; eth*.0*|bond*.0*|wlan*.0*|em*.0*|p[0-9]*.0*|enp[0-9]*.0*) vconfig set_name_type DEV_PLUS_VID VLANID=`echo $IFACE|sed "s/eth[0-9][0-9]*\.0*//g;s/bond[0-9][0-9]*\.0*//g;s/wlan[0-9][0-9]*\.0*//g;s/em[0-9][0-9]*\.0*//g;s/p[0-9][0-9]*\(p[0-9][0-9]*\)\?\(_[0-9][0-9]*\)\?\.0*//g;s/enp[0-9]s[0-9]f[0-9]\.0*//g"` IF_VLAN_RAW_DEVICE=`echo $IFACE|sed "s/\(eth[0-9][0-9]*\)\..*/\1/;s/\(bond[0-9][0-9]*\)\..*/\1/;s/\(wlan[0-9][0-9]*\)\..*/\1/;s/\(em[0-9][0-9]*\)\..*/\1/;s/\(p[0-9][0-9]*\(p[0-9][0-9]*\)\?\(_[0-9][0-9]*\)\?\)\..*/\1/;s/\(enp[0-9]s[0-9]f[0-9]\)\..*/\1/"` ;; eth*.*|bond*.*|wlan*.*|em*.*|p[0-9]*.*|enp[0-9]*.*) vconfig set_name_type DEV_PLUS_VID_NO_PAD VLANID=`echo $IFACE|sed "s/eth[0-9][0-9]*\.0*//g;s/bond[0-9][0-9]*\.0*//g;s/wlan[0-9][0-9]*\.0*//g;s/em[0-9][0-9]*\.0*//g;s/p[0-9][0-9]*\(p[0-9][0-9]*\)\?\(_[0-9][0-9]*\)\?\.0*//g;s/enp[0-9]s[0-9]f[0-9]\.//g"` IF_VLAN_RAW_DEVICE=`echo $IFACE|sed "s/\(eth[0-9][0-9]*\)\..*/\1/;s/\(bond[0-9][0-9]*\)\..*/\1/;s/\(wlan[0-9][0-9]*\)\..*/\1/;s/\(em[0-9][0-9]*\)\..*/\1/;s/\(p[0-9][0-9]*\(p[0-9][0-9]*\)\?\(_[0-9][0-9]*\)\?\)\..*/\1/;s/\(enp[0-9]s[0-9]f[0-9]\)\..*/\1/"` ;; *.0*) # Silently ignore interfaces which we do not (know how to) support [ -z "$IF_VLAN_RAW_DEVICE" ] && exit 0 vconfig set_name_type DEV_PLUS_VID VLANID=`echo $IFACE|sed "s/[^.]*\.0*//g"` ;; *.*) # Silently ignore interfaces which we do not (know how to) support [ -z "$IF_VLAN_RAW_DEVICE" ] && exit 0 vconfig set_name_type DEV_PLUS_VID_NO_PAD VLANID=`echo $IFACE|sed "s/[^.]*\.0*//g"` ;; *) exit 0 ;; esac if [ -n "$IF_VLAN_RAW_DEVICE" ] && [ ! -d /sys/class/net/$IFACE ]; then if [ ! -x /sbin/vconfig ]; then exit 0 fi if ! ip link show dev "$IF_VLAN_RAW_DEVICE" > /dev/null; then echo "$IF_VLAN_RAW_DEVICE does not exist, unable to create $IFACE" exit 1 fi if [ ! -e "/sys/class/net/$IFACE" ]; then ip link set up dev $IF_VLAN_RAW_DEVICE vconfig add $IF_VLAN_RAW_DEVICE $VLANID fi fi # This is not vlan specific, and should actually go somewhere else. if [ -n "$IF_HW_MAC_ADDRESS" ]; then ip link set $IFACE address $IF_HW_MAC_ADDRESS fi if-post-down: #!/bin/sh # If IFACE is an automagic vlan interface (without the vlan-raw-device # parameter) then let's try to discover the magic here.. Another way would be # to just probe for the right device name in /proc/net/vlan case "$IFACE" in # Ignore any alias (#272891) *:*) exit 0 ;; eth*.0*|bond*.0*|wlan*.0*|em*.0*|p[0-9]*.0*|enp[0-9]*\.0*) IF_VLAN_RAW_DEVICE=`echo $IFACE|sed "s/\(eth[0-9][0-9]*\)\..*/\1/;s/\(bond[0-9][0-9]*\)\..*/\1/;s/\(wlan[0-9][0-9]*\)\..*/\1/;s/\(em[0-9][0-9]*\)\..*/\1/;s/\(p[0-9][0-9]*\(p[0-9][0-9]*\)\?\(_[0-9][0-9]*\)\?\)\..*/\1/"` ;; eth*.*|bond*.*|wlan*.*|em*.*|p[0-9]*.*|enp[0-9]*\.*) IF_VLAN_RAW_DEVICE=`echo $IFACE|sed "s/\(eth[0-9][0-9]*\)\..*/\1/;s/\(bond[0-9][0-9]*\)\..*/\1/;s/\(wlan[0-9][0-9]*\)\..*/\1/;s/\(em[0-9][0-9]*\)\..*/\1/;s/\(p[0-9][0-9]*\(p[0-9][0-9]*\)\?\(_[0-9][0-9]*\)\?\)\..*/\1/"` ;; # Test for vlan raw device (#196890, #292648) *) [ -z "$IF_VLAN_RAW_DEVICE" ] && exit 0 ;; esac if [ ! -x /sbin/vconfig ]; then exit 0 fi vconfig rem $IFACE To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ifupdown/+bug/1628591/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
