apport information

** Attachment added: "rfkill.txt"

You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.

   Incorrect advertise flags in bluetooth beacon using BlueZ

Status in bluez package in Ubuntu:

Bug description:
  I tried the following on bluex version 5.48 and 5.52.

  I have set ControllerMode to "le" in main.conf.

  Using bluetootctl, when i turn on the advertisement using command
  "advertise on" ,

  I get 0x02 advertisement flag. which means "BR/EDR Not Supported" (Bit
  2) is not set.

  Now , if i restart the bluetooth service, and turn on the advertisement 
again, I get 0x06 advertisement flags.

  Here is my main.conf

  [General]# Default adaper name
  # Defaults to 'BlueZ X.YZ'
  #Name = BlueZ# Default device class. Only the major and minor device class 
bits are
  # considered. Defaults to '0x000000'.
  Class = 0x000100# How long to stay in discoverable mode before going back to 
  # The value is in seconds. Default is 180, i.e. 3 minutes.
  # 0 = disable timer, i.e. stay discoverable forever
  DiscoverableTimeout = 0# How long to stay in pairable mode before going back 
to non-discoverable
  # The value is in seconds. Default is 0.
  # 0 = disable timer, i.e. stay pairable forever
  #PairableTimeout = 0# Automatic connection for bonded devices driven by 
platform/user events.
  # If a platform plugin uses this mechanism, automatic connections will be
  # enabled during the interval defined below. Initially, this feature
  # intends to be used to establish connections to ATT channels. Default is 60.
  #AutoConnectTimeout = 60# Use vendor id source (assigner), vendor, product 
and version information for
  # DID profile support. The values are separated by ":" and assigner, VID, PID
  # and version.
  # Possible vendor id source values: bluetooth, usb (defaults to usb)
  #DeviceID = bluetooth:1234:5678:abcd# Do reverse service discovery for 
previously unknown devices that connect to
  # us. This option is really only needed for qualification since the BITE 
  # doesn't like us doing reverse SDP for some test cases (though there could in
  # theory be other useful purposes for this too). Defaults to 'true'.
  #ReverseServiceDiscovery = true# Enable name resolving after inquiry. Set it 
to 'false' if you don't need
  # remote devices name and want shorter discovery cycle. Defaults to 'true'.
  #NameResolving = true# Enable runtime persistency of debug link keys. Default 
is false which
  # makes debug link keys valid only for the duration of the connection
  # that they were created for.
  #DebugKeys = false# Restricts all controllers to the specified transport. 
Default value
  # is "dual", i.e. both BR/EDR and LE enabled (when supported by the HW).
  # Possible values: "dual", "bredr", "le"
  ControllerMode = le# Enables Multi Profile Specification support. This allows 
to specify if
  # system supports only Multiple Profiles Single Device (MPSD) configuration
  # or both Multiple Profiles Single Device (MPSD) and Multiple Profiles 
  # Devices (MPMD) configurations.
  # Possible values: "off", "single", "multiple"
  #MultiProfile = off# Permanently enables the Fast Connectable setting for 
adapters that
  # support it. When enabled other devices can connect faster to us,
  # however the tradeoff is increased power consumptions. This feature
  # will fully work only on kernel version 4.1 and newer. Defaults to
  # 'false'.
  #FastConnectable = false[Policy]# The ReconnectUUIDs defines the set of 
remote services that should try
  # to be reconnected to in case of a link loss (link supervision
  # timeout). The policy plugin should contain a sane set of values by
  # default, but this list can be overridden here. By setting the list to
  # empty the reconnection feature gets disabled.
0000111f-0000-1000-8000-00805f9b34fb, 0000110a-0000-1000-8000-00805f9b34fb# 
ReconnectAttempts define the number of attempts to reconnect after a link
  # lost. Setting the value to 0 disables reconnecting feature.
  #ReconnectAttempts=7# ReconnectIntervals define the set of intervals in 
seconds to use in between
  # attempts.
  # If the number of attempts defined in ReconnectAttempts is bigger than the
  # set of intervals the last interval is repeated until the last attempt.
  #ReconnectIntervals=1, 2, 4, 8, 16, 32, 64# AutoEnable defines option to 
enable all controllers when they are found.
  # This includes adapters present on start as well as adapters that are plugged
  # in later on. Defaults to 'false'.

  And bluetooth.service

  Description=Bluetooth service
  ExecStart=/usr/libexec/bluetooth/bluetoothd -d -n --configfile 
  ProblemType: Bug
  ApportVersion: 2.20.9-0ubuntu7.12
  Architecture: amd64
  CurrentDesktop: ubuntu:GNOME
  DistroRelease: Ubuntu 18.04
  InstallationDate: Installed on 2019-10-28 (147 days ago)
  InstallationMedia: Ubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64 
  InterestingModules: bnep btusb bluetooth
   Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
   Bus 001 Device 003: ID 27c6:5395  
   Bus 001 Device 004: ID 0c45:671d Microdia 
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  MachineType: Dell Inc. Precision 5530
  NonfreeKernelModules: nvidia_modeset nvidia
  Package: bluez 5.48-0ubuntu3.3
  PackageArchitecture: amd64
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-91-generic 
root=UUID=1b13cc02-9bc8-4a25-b4cf-b5cf5285e841 ro quiet splash 
psmouse.proto=bare vt.handoff=1
  ProcVersionSignature: Ubuntu 4.15.0-91.92-generic 4.15.18
  Tags:  bionic
  Uname: Linux 4.15.0-91-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip docker lpadmin plugdev sambashare sudo vboxusers
  _MarkForUpload: True 06/27/2019
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: 1.12.0 0NFGCT
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A00
  dmi.chassis.type: 10
  dmi.chassis.vendor: Dell Inc.
dmi:bvnDellInc.:bvr1.12.0:bd06/27/2019:svnDellInc.:pnPrecision5530:pvr:rvnDellInc.:rn0NFGCT:rvrA00:cvnDellInc.:ct10:cvr: Precision Precision 5530
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:

Mailing list:
Post to     :
Unsubscribe :
More help   :

Reply via email to