Patch proposed upstream:

https://lists.zytor.com/archives/klibc/2021-December/004629.html

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to klibc in Ubuntu.
https://bugs.launchpad.net/bugs/1947099

Title:
  ipconfig does not honour user-requested timeouts in some cases

Status in klibc package in Ubuntu:
  New
Status in klibc source package in Bionic:
  In Progress

Bug description:
  
  [Impact]
  In some cases, ipconfig can take a longer time than the user-specified 
timeouts, causing unexpected delays.

  [Test Plan]
  Any situation where ipconfig encounters an error sending the DHCP packet, it 
will automatically set a delay of 10 seconds, which could be longer than the 
user-specified timeout. It can be reproduced by creating a dummy interface and 
attempting to run ipconfig on it with a timeout value of less than 10:

  # ip link add eth1 type dummy
  # date; /usr/lib/klibc/bin/ipconfig -t 2 eth1; date
  Thu Nov 18 04:46:13 EST 2021
  IP-Config: eth1 hardware address ae:e0:f5:9d:7e:00 mtu 1500 DHCP RARP
  IP-Config: no response after 2 secs - giving up
  Thu Nov 18 04:46:23 EST 2021

  ^ Notice above, ipconfig thinks that it waited 2 seconds, but the
  timestamps show an actual delay of 10 seconds.

  [Where problems could occur]
  Please see reproduction steps above. We are seeing this in production too 
(see comment #2).

  [Other Info]
  A patch to fix the issue is being proposed here. It is a safe fix - it only 
checks before going into sleep that the timeout never exceeds the 
user-requested value.

  [Original Description]

  In some cases, ipconfig can take longer than the user-specified
  timeouts, causing unexpected delays.

  in main.c, in function loop(), the process can go into
  process_timeout_event() (or process_receive_event() ) and if it
  encounters an error situation, will set an attempt to "try again
  later" at time equal now + 10 seconds by setting

  s->expire = now + 10;

  This can happen at any time during the main event loop, which can end
  up extending the user-specified timeout if "now + 10" is greater than
  "start_time + user-specified-timeout".

  I believe a patch like the following is needed to avoid this problem:

  --- a/usr/kinit/ipconfig/main.c
  +++ b/usr/kinit/ipconfig/main.c
  @@ -437,6 +437,13 @@ static int loop(void)

                          if (timeout > s->expire - now.tv_sec)
                                  timeout = s->expire - now.tv_sec;
  +
  +                       /* Compensate for already-lost time */
  +                       gettimeofday(&now, NULL);
  +                       if (now.tv_sec + timeout > start + loop_timeout) {
  +                               timeout = loop_timeout - (now.tv_sec - start);
  +                               printf("Lowered timeout to match user request 
= (%d s) \n", timeout);
  +                       }
                  }

  I believe the current behaviour is buggy. This is confirmed when the
  following line is executed:

                          if (loop_timeout >= 0 &&
                              now.tv_sec - start >= loop_timeout) {
                                  printf("IP-Config: no response after %d "
                                         "secs - giving up\n", loop_timeout);
                                  rc = -1;
                                  goto bail;
                          }

  'loop_timeout' is the user-specified time-out. With a value of 2, in
  case of error, this line prints:

  IP-Config: no response after 2 secs - giving up

  So it thinks that it waited 2 seconds - however, in reality it had
  actually waited for 10 seconds.

  The suggested code-change ensures that the timeout that is actually
  used never exceeds the user-specified timeout.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/klibc/+bug/1947099/+subscriptions


-- 
Mailing list: https://launchpad.net/~touch-packages
Post to     : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

Reply via email to