All tests passed already.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to rsync in Ubuntu.
https://bugs.launchpad.net/bugs/1528921
Title:
rsync hangs on select(5, [], [4], [], {60, 0}
Status in rsync:
Unknown
Status in rsync package in Ubuntu:
Fix Released
Status in rsync source package in Bionic:
Fix Committed
Status in rsync source package in Focal:
Fix Committed
Bug description:
[Impact]
What the user suffering from this bug experiences is that the big
amount of informative messages related to the copy process with the
three spawned processes(sender, receiver and generator) exhaust the
I/O buffer and the sync gets stuck, either because there are too many
files to synchronise and/or because too many detail messages (levels
of verbose mode) have been requested in the output.
The fix, that comes from upstream and is applied there since version
3.2.0., increments the size of the receiver's I/O buffer.
[Test Plan]
This test plan is for Focal, but it's the same for Bionic.
0.Preparing the test environment:
#Preparing the container
lxc launch images:ubuntu/focal rsync-iobuffer-focal
lxc shell rsync-iobuffer-focal
apt update -y
apt upgrade -y
#Installing necessary tools
apt install rsync
#Get test cases from comments #16 and #19 on this LP bug: As test case
#16 covers both aspects (a lot of files and upper verbosity) and test
#19 uses a huge tarball (120 Mb), I'm removing from this SRU the #19
scenario (but, please, feel to reach me it if you consider it
necessary and I'll provide the steps and bad/good scenarios).
cd /tmp/
#16
Paste the contents of https://pastebin.com/raw/ctzJJGwt:
#!/bin/bash
mkdir source_dir
pushd source_dir
dd if=/dev/zero of=source bs=600K count=1
for i in `seq 1 11500`;
do
cp -v source file_$i;
done
rm source
for i in `seq 1 10`;
do
dd if=/dev/zero of=file_large_$i bs=200M count=1
done
popd
echo "Created 11500 files with size 600K and 10 files with size 200M, try the
following command:"
echo "rsync -avvvz --delete source_dir target_dir"
in a new file script_comment16.sh
chmod +x script_comment16.sh
./script_comment16.sh
1. Bad cases (without and with using strace):
# Scenario from comment 16
$ rsync -avvvz --delete source_dir target_dir
sending incremental file list
[sender] make_file(source_dir,*,0)
send_file_list done
[sender] pushing local filters for /root/source_dir/
[sender] make_file(source_dir/file_3048,*,2)
[sender] make_file(source_dir/file_11358,*,2)
[sender] make_file(source_dir/file_5914,*,2)
[sender] make_file(source_dir/file_5880,*,2)
[sender] make_file(source_dir/file_9318,*,2)
[sender] make_file(source_dir/file_5539,*,2)
[...]
sending file_sum
false_alarms=0 hash_hits=0 matches=0
sender finished source_dir/file_10807
send_files(903, source_dir/file_10808)
send_files mapped source_dir/file_10808 of size 614400
calling match_sums source_dir/file_10808
source_dir/file_10808
It hangs here, where using strace we can see:
$ strace rsync -avvvz --delete source_dir target_dir
source_dir/file_11280
read(3,
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 262144)
= 262144
read(3,
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 262144)
= 262144
read(3,
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 90112) =
90112
select(6, [5], [4], [5], {tv_sec=60, tv_usec=0}) = 1 (in [5], left
{tv_sec=59, tv_usec=999996})
read(5,
"\0\0\0\0\0\0\0\1\0\240\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\1\0\240\0\0\0"...,
1900) = 1900
select(5, [], [4], [], {tv_sec=60, tv_usec=0}) = 0 (Timeout)
select(5, [], [4], [], {tv_sec=60, tv_usec=0}) = 0 (Timeout)
select(5, [], [4], [], {tv_sec=60, tv_usec=0}
1. Good cases:
# Scenario from comment 16
$ rsync -avvvz --delete source_dir target_dir
sending incremental file list
[sender] make_file(source_dir,*,0)
send_file_list done
[sender] pushing local filters for /tmp/source_dir/
[sender] make_file(source_dir/file_3052,*,2)
[sender] make_file(source_dir/file_1766,*,2)
[sender] make_file(source_dir/file_10466,*,2)
[sender] make_file(source_dir/file_9375,*,2)
[sender] make_file(source_dir/file_7260,*,2)
[sender] make_file(source_dir/file_5554,*,2)
[sender] make_file(source_dir/file_5523,*,2)
[sender] make_file(source_dir/file_1685,*,2)
[sender] make_file(source_dir/file_7217,*,2)
[sender] make_file(source_dir/file_10411,*,2)
[...]
generate_files finished
sent 9,555,678 bytes received 3,599,560 bytes 124,694.20 bytes/sec
total size is 9,162,752,000 speedup is 696.51
[Where problems could occur]
Perhaps the buffer size may not be sufficient for an operation
involving a very huge amount of data, as reported upstream here (
https://bugzilla.samba.org/show_bug.cgi?id=11166#c9 ): the reporter
asked for a parameter to manually change the size of the receiver's
buffer I/O for messaging for those cases, but it may lend itself to a
memory overflow more easily even than this solution which also has
this risk.
[Other Info]
The fix has been picked from upstream here
https://github.com/WayneD/rsync/commit/01b9bbb0f94e4ddd4b1e3ad678b220ca09bc0ad0
. I've checked on bugzilla that there aren't bugs related to "out of
memory" issues after 3.2.0 release.
[Original Report]
-------------------------------------------------------------------
In the last few months my home directory backup stopped completing. I've
been able to reproduce the problem on a single subdirectory although I had to
add the --debug=all flag to reproduce it on that smaller directory.
Specifically, this command never completes:
rsync --debug=all -avz /tmp/html2 /tmp/rsynctest/
The html2 directory is a copy of
gnuradio-3.7.8.1/build/docs/doxygen/html .
When I strace the command, I see this:
write(1, "sender finished /tmp/html2/atsc_"..., 58sender finished
/tmp/html2/atsc__interleaver_8h__incl.md5
) = 58
write(1, "send_files(338, /tmp/html2/atsc_"..., 59send_files(338,
/tmp/html2/atsc__interleaver_8h__incl.png)
) = 59
open("html2/atsc__interleaver_8h__incl.png", O_RDONLY|O_LARGEFILE) = 3
fstat64(3, {st_mode=S_IFREG|0664, st_size=264657, ...}) = 0
write(1, "html2/atsc__interleaver_8h__incl"...,
37html2/atsc__interleaver_8h__incl.png
) = 37
read(3,
"\211PNG\r\n\32\n\0\0\0\rIHDR\0\0\n\253\0\0\2\233\10\6\0\0\0h\242\""...,
262144) = 262144
select(6, [5], [4], [5], {60, 0}) = 2 (in [5], out [4], left {59,
999996})
read(5,
"\0\0\0\0\0\0\0\1\0\240\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\1\0\240\0\0\0"..., 95)
= 95
write(4,
"r\311\0\7\177\377\232\237\264\272e\300\300\240\316\264&\314\301\252*\37\256y\225g\373^\315j\370\350"...,
51574) = 51574
select(5, [], [4], [], {60, 0}) = 1 (out [4], left {59, 999997})
write(4,
"\7\320\0\7\177\377\234|\7X\223Y\273\255c\27\25f\306\212\202\214#E\272\212t\1\225A\fU"...,
53259) = 53259
select(5, [], [4], [], {60, 0}
The select command times out over and over. I get the same behavior
when trying to back up my entire home directory but I don't need the
--debug=all flag in that case.
lsb_release -rd
Description: Ubuntu 14.04.3 LTS
Release: 14.04
apt-cache policy rsync
rsync:
Installed: 3.1.0-2ubuntu0.1
Candidate: 3.1.0-2ubuntu0.1
Version table:
*** 3.1.0-2ubuntu0.1 0
500 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main i386
Packages
500 http://security.ubuntu.com/ubuntu/ trusty-security/main i386
Packages
100 /var/lib/dpkg/status
3.1.0-2 0
500 http://us.archive.ubuntu.com/ubuntu/ trusty/main i386 Packages
ProblemType: Bug
DistroRelease: Ubuntu 14.04
Package: rsync 3.1.0-2ubuntu0.1
ProcVersionSignature: Ubuntu 3.13.0-74.118-generic 3.13.11-ckt30
Uname: Linux 3.13.0-74-generic i686
NonfreeKernelModules: nvidia
ApportVersion: 2.14.1-0ubuntu3.19
Architecture: i386
CurrentDesktop: KDE
Date: Wed Dec 23 09:44:17 2015
EcryptfsInUse: Yes
InstallationDate: Installed on 2010-09-18 (1922 days ago)
InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Beta i386 (20100901.1)
SourcePackage: rsync
UpgradeStatus: Upgraded to trusty on 2014-12-27 (361 days ago)
To manage notifications about this bug go to:
https://bugs.launchpad.net/rsync/+bug/1528921/+subscriptions
--
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help : https://help.launchpad.net/ListHelp
