apport information
** Tags added: apport-collected focal uec-images
** Description changed:
If a host has 2 adapters, the scanner run for a few second then get an
error msg Could not receive advertising events: Broken pipe, then hci0
turns down when I run hciconfig
hci0: Type: Primary Bus: USB
BD Address: 00:1A:7D:DA:71:13 ACL MTU: 310:10 SCO MTU: 64:8
DOWN
RX bytes:574 acl:0 sco:0 events:30 errors:0
TX bytes:368 acl:0 sco:0 commands:30 errors:0
hci1: Type: Primary Bus: USB
BD Address: 00:1A:7D:DA:71:13 ACL MTU: 310:10 SCO MTU: 64:8
UP RUNNING
RX bytes:221883 acl:0 sco:0 events:8327 errors:0
TX bytes:1027 acl:0 sco:0 commands:67 errors:0
This happend after I updated bluez from 5.62 to 5.63.
If I do scan again, everything works fine with one adapter.
As both adapters use the same mac address, I changed the address of hci0
hci0: Type: Primary Bus: USB
BD Address: 00:01:07:00:47:0E ACL MTU: 310:10 SCO MTU: 64:8
UP RUNNING
RX bytes:1184 acl:0 sco:0 events:66 errors:0
TX bytes:1072 acl:0 sco:0 commands:66 errors:0
hci1: Type: Primary Bus: USB
BD Address: 00:1A:7D:DA:71:13 ACL MTU: 310:10 SCO MTU: 64:8
UP RUNNING
RX bytes:221961 acl:0 sco:0 events:8340 errors:0
TX bytes:3078 acl:0 sco:0 commands:80 errors:0
but the old address keeps reverted back which was not the case in 5.62
I ran scan again while running btmon
@ MGMT Event: Command Complete (0x0001) plen 283 {0x0001} [hci0]
1052.238244
Read Controller Information (0x0004) plen 280
Status: Success (0x00)
Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd)
Version: Bluetooth 4.0 (0x06)
Manufacturer: Cambridge Silicon Radio (10)
Supported settings: 0x0001beff
Powered
Connectable
Fast Connectable
Discoverable
Bondable
Link Security
Secure Simple Pairing
BR/EDR
Low Energy
Advertising
Secure Connections
Debug Keys
Privacy
Static Address
PHY Configuration
Current settings: 0x00000080
BR/EDR
Class: 0x000000
Major class: Miscellaneous
Minor class: 0x00
Name: CSR8510 A10
Short name:
= bluetoothd: Failed to start listening: l2cap_bind: Address al..
1052.238720
= bluetoothd: Failed to create GATT database for adapter [hci0]
1052.238742
= bluetoothd: Unable to register new adapter [hci0]
1052.238761
= Close Index: 00:1A:7D:DA:71:13 [hci0]
1054.246981
@ MGMT Event: Index Added (0x0004) plen 0
{0x0001} [hci0] 98.950611
@ MGMT Command: Read Controller Information (0x0004) plen 0
{0x0001} [hci0] 98.950707
@ MGMT Event: Command Complete (0x0001) plen 283
{0x0001} [hci0] 98.950714
Read Controller Information (0x0004) plen 280
Status: Success (0x00)
Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd)
Version: Bluetooth 4.0 (0x06)
Manufacturer: Cambridge Silicon Radio (10)
Supported settings: 0x0001beff
Powered
Connectable
Fast Connectable
Discoverable
Bondable
Link Security
Secure Simple Pairing
BR/EDR
Low Energy
Advertising
Secure Connections
Debug Keys
Privacy
Static Address
PHY Configuration
Current settings: 0x00000080
BR/EDR
Class: 0x000000
Major class: Miscellaneous
Minor class: 0x00
Name: CSR8510 A10
Short name:
= bluetoothd: Failed to start listening: l2cap_bind: Address already in use
(98)
98.951201
= bluetoothd: Failed to create GATT database for adapter
[hci0] 98.951229
= bluetoothd: Unable to register new adapter
[hci0] 98.951248
= Close Index: 00:1A:7D:DA:71:13
[hci0] 100.967001
+ ---
+ ProblemType: Bug
+ ApportVersion: 2.20.11-0ubuntu27.21
+ Architecture: amd64
+ CasperMD5CheckResult: skip
+ DistroRelease: Ubuntu 20.04
+ InterestingModules: bnep btusb bluetooth
+ MachineType: Dell Inc. OptiPlex 980
+ Package: bluez 5.53-0ubuntu3.4 [modified: usr/bin/bluemoon
usr/bin/bluetoothctl usr/bin/btattach usr/bin/btmon usr/bin/hex2hcd
usr/bin/l2ping usr/bin/l2test usr/bin/rctest]
+ PackageArchitecture: amd64
+ ProcEnviron:
+ TERM=xterm
+ PATH=(custom, no user)
+ XDG_RUNTIME_DIR=<set>
+ LANG=en_US.UTF-8
+ SHELL=/bin/bash
+ ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-91-generic
root=UUID=efa9b1c2-c6aa-11e8-a90c-b8ac6f9e2c98 ro
+ ProcVersionSignature: Ubuntu 5.4.0-91.102-generic 5.4.151
+ Tags: focal uec-images
+ Uname: Linux 5.4.0-91-generic x86_64
+ UpgradeStatus: Upgraded to focal on 2020-09-06 (542 days ago)
+ UserGroups: adm cdrom dip docker lxd netdev plugdev sudo
+ _MarkForUpload: True
+ acpidump:
+ Error: command ['pkexec', '/usr/share/apport/dump_acpi_tables.py'] failed
with exit code 127: Error executing command as another user: Not authorized
+
+ This incident has been reported.
+ dmi.bios.date: 02/16/2010
+ dmi.bios.vendor: Dell Inc.
+ dmi.bios.version: A01
+ dmi.board.name: 0D441T
+ dmi.board.vendor: Dell Inc.
+ dmi.board.version: A00
+ dmi.chassis.type: 6
+ dmi.chassis.vendor: Dell Inc.
+ dmi.modalias:
dmi:bvnDellInc.:bvrA01:bd02/16/2010:svnDellInc.:pnOptiPlex980:pvr:rvnDellInc.:rn0D441T:rvrA00:cvnDellInc.:ct6:cvr:
+ dmi.product.name: OptiPlex 980
+ dmi.sys.vendor: Dell Inc.
+ mtime.conffile..etc.bluetooth.main.conf: 2022-03-02T10:48:10.933611
+ mtime.conffile..etc.dbus-1.system.d.bluetooth.conf: 2022-03-02T10:47:40.322184
** Attachment added: "CurrentDmesg.txt"
https://bugs.launchpad.net/bugs/1962769/+attachment/5565117/+files/CurrentDmesg.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1962769
Title:
Could not receive advertising events: Broken pipe
Status in bluez package in Ubuntu:
Incomplete
Bug description:
If a host has 2 adapters, the scanner run for a few second then get an
error msg Could not receive advertising events: Broken pipe, then hci0
turns down when I run hciconfig
hci0: Type: Primary Bus: USB
BD Address: 00:1A:7D:DA:71:13 ACL MTU: 310:10 SCO MTU: 64:8
DOWN
RX bytes:574 acl:0 sco:0 events:30 errors:0
TX bytes:368 acl:0 sco:0 commands:30 errors:0
hci1: Type: Primary Bus: USB
BD Address: 00:1A:7D:DA:71:13 ACL MTU: 310:10 SCO MTU: 64:8
UP RUNNING
RX bytes:221883 acl:0 sco:0 events:8327 errors:0
TX bytes:1027 acl:0 sco:0 commands:67 errors:0
This happend after I updated bluez from 5.62 to 5.63.
If I do scan again, everything works fine with one adapter.
As both adapters use the same mac address, I changed the address of hci0
hci0: Type: Primary Bus: USB
BD Address: 00:01:07:00:47:0E ACL MTU: 310:10 SCO MTU: 64:8
UP RUNNING
RX bytes:1184 acl:0 sco:0 events:66 errors:0
TX bytes:1072 acl:0 sco:0 commands:66 errors:0
hci1: Type: Primary Bus: USB
BD Address: 00:1A:7D:DA:71:13 ACL MTU: 310:10 SCO MTU: 64:8
UP RUNNING
RX bytes:221961 acl:0 sco:0 events:8340 errors:0
TX bytes:3078 acl:0 sco:0 commands:80 errors:0
but the old address keeps reverted back which was not the case in 5.62
I ran scan again while running btmon
@ MGMT Event: Command Complete (0x0001) plen 283 {0x0001} [hci0]
1052.238244
Read Controller Information (0x0004) plen 280
Status: Success (0x00)
Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd)
Version: Bluetooth 4.0 (0x06)
Manufacturer: Cambridge Silicon Radio (10)
Supported settings: 0x0001beff
Powered
Connectable
Fast Connectable
Discoverable
Bondable
Link Security
Secure Simple Pairing
BR/EDR
Low Energy
Advertising
Secure Connections
Debug Keys
Privacy
Static Address
PHY Configuration
Current settings: 0x00000080
BR/EDR
Class: 0x000000
Major class: Miscellaneous
Minor class: 0x00
Name: CSR8510 A10
Short name:
= bluetoothd: Failed to start listening: l2cap_bind: Address al..
1052.238720
= bluetoothd: Failed to create GATT database for adapter [hci0]
1052.238742
= bluetoothd: Unable to register new adapter [hci0]
1052.238761
= Close Index: 00:1A:7D:DA:71:13 [hci0]
1054.246981
@ MGMT Event: Index Added (0x0004) plen 0
{0x0001} [hci0] 98.950611
@ MGMT Command: Read Controller Information (0x0004) plen 0
{0x0001} [hci0] 98.950707
@ MGMT Event: Command Complete (0x0001) plen 283
{0x0001} [hci0] 98.950714
Read Controller Information (0x0004) plen 280
Status: Success (0x00)
Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd)
Version: Bluetooth 4.0 (0x06)
Manufacturer: Cambridge Silicon Radio (10)
Supported settings: 0x0001beff
Powered
Connectable
Fast Connectable
Discoverable
Bondable
Link Security
Secure Simple Pairing
BR/EDR
Low Energy
Advertising
Secure Connections
Debug Keys
Privacy
Static Address
PHY Configuration
Current settings: 0x00000080
BR/EDR
Class: 0x000000
Major class: Miscellaneous
Minor class: 0x00
Name: CSR8510 A10
Short name:
= bluetoothd: Failed to start listening: l2cap_bind: Address already in use
(98)
98.951201
= bluetoothd: Failed to create GATT database for adapter
[hci0] 98.951229
= bluetoothd: Unable to register new adapter
[hci0] 98.951248
= Close Index: 00:1A:7D:DA:71:13
[hci0] 100.967001
---
ProblemType: Bug
ApportVersion: 2.20.11-0ubuntu27.21
Architecture: amd64
CasperMD5CheckResult: skip
DistroRelease: Ubuntu 20.04
InterestingModules: bnep btusb bluetooth
MachineType: Dell Inc. OptiPlex 980
Package: bluez 5.53-0ubuntu3.4 [modified: usr/bin/bluemoon
usr/bin/bluetoothctl usr/bin/btattach usr/bin/btmon usr/bin/hex2hcd
usr/bin/l2ping usr/bin/l2test usr/bin/rctest]
PackageArchitecture: amd64
ProcEnviron:
TERM=xterm
PATH=(custom, no user)
XDG_RUNTIME_DIR=<set>
LANG=en_US.UTF-8
SHELL=/bin/bash
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-91-generic
root=UUID=efa9b1c2-c6aa-11e8-a90c-b8ac6f9e2c98 ro
ProcVersionSignature: Ubuntu 5.4.0-91.102-generic 5.4.151
Tags: focal uec-images
Uname: Linux 5.4.0-91-generic x86_64
UpgradeStatus: Upgraded to focal on 2020-09-06 (542 days ago)
UserGroups: adm cdrom dip docker lxd netdev plugdev sudo
_MarkForUpload: True
acpidump:
Error: command ['pkexec', '/usr/share/apport/dump_acpi_tables.py'] failed
with exit code 127: Error executing command as another user: Not authorized
This incident has been reported.
dmi.bios.date: 02/16/2010
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A01
dmi.board.name: 0D441T
dmi.board.vendor: Dell Inc.
dmi.board.version: A00
dmi.chassis.type: 6
dmi.chassis.vendor: Dell Inc.
dmi.modalias:
dmi:bvnDellInc.:bvrA01:bd02/16/2010:svnDellInc.:pnOptiPlex980:pvr:rvnDellInc.:rn0D441T:rvrA00:cvnDellInc.:ct6:cvr:
dmi.product.name: OptiPlex 980
dmi.sys.vendor: Dell Inc.
mtime.conffile..etc.bluetooth.main.conf: 2022-03-02T10:48:10.933611
mtime.conffile..etc.dbus-1.system.d.bluetooth.conf: 2022-03-02T10:47:40.322184
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1962769/+subscriptions
--
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help : https://help.launchpad.net/ListHelp
