Jammy/22.04: - test packages in ppa:mfo/lp1926139 - reproduction steps delta (based on comment #9)
... Reproducer based on GDB and DHCP noise injection. It uses 3 veth pairs (DHCP server/client/injector, the latter two under namespaces) on a linux bridge. ... LXD VM: lxc launch ubuntu:jammy lp1926139-jammy --vm lxc shell lp1926139-jammy GDB Reproducer (original package): ============== Debug symbols: # wget https://launchpad.net/ubuntu/+archive/primary/+files/isc-dhcp-client-dbgsym_4.4.1-2.3ubuntu2.3_amd64.ddeb # apt install -y ./isc-dhcp-client-dbgsym_4.4.1-2.3ubuntu2.3_amd64.ddeb Source code line numbers (for breakpoint): 198 isc_result_t omapi_register_io_object (omapi_object_t *h, ... 259 status = isc_socket_fdwatchcreate(dhcp_gbl_ctx.socketmgr, ... 279 for (p = omapi_io_states.next; Attempt to reproduce the issue with a delay introduced via breakpoint on line 279: # ip netns exec ns1 \ gdb -ex 'set target-async on' -ex 'set non-stop on' -ex 'set pagination off' -ex 'set confirm off' -q dhclient (gdb) break omapip/dispatch.c:279 (gdb) commands shell sleep 0.2 continue end (gdb) run -v -d veth1 GDB Reproducer (patched package): ============== Client & Debug symbols: # wget \ https://launchpad.net/~mfo/+archive/ubuntu/lp1926139/+files/isc-dhcp-client_4.4.1-2.3ubuntu2.3+lp1926139.2_amd64.deb \ https://launchpad.net/~mfo/+archive/ubuntu/lp1926139/+files/isc-dhcp-client-dbgsym_4.4.1-2.3ubuntu2.3+lp1926139.2_amd64.ddeb # sudo apt install \ ./isc-dhcp-client_4.4.1-2.3ubuntu2.3+lp1926139.2_amd64.deb \ ./isc-dhcp-client-dbgsym_4.4.1-2.3ubuntu2.3+lp1926139.2_amd64.ddeb Source code line numbers (for breakpoint): 233 isc_result_t omapi_register_io_object (omapi_object_t *h, ... 312 status = isc_socket_fdwatchcreate(dhcp_gbl_ctx.socketmgr, ... 333 for (p = omapi_io_states.next; Attempt to reproduce the issue again, the same way, with a delay introduced via breakpoint on line 333: # ip netns exec ns1 \ gdb -ex 'set target-async on' -ex 'set non-stop on' -ex 'set pagination off' -ex 'set confirm off' -q dhclient (gdb) break omapip/dispatch.c:333 (gdb) commands shell sleep 0.2 continue end (gdb) run -v -d veth1 ... -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to isc-dhcp in Ubuntu. https://bugs.launchpad.net/bugs/1926139 Title: dhclient: thread concurrency race leads to DHCPOFFER packets not being received Status in bind9-libs package in Ubuntu: Won't Fix Status in isc-dhcp package in Ubuntu: Invalid Status in isc-dhcp source package in Focal: In Progress Status in isc-dhcp source package in Jammy: In Progress Bug description: [Impact] Occasionally, during instance boot or machine start-up, dhclient will attempt to acquire a dhcp lease and fail, leaving the instance with no IP address and making it unreachable. This happens about once every 100 reboots on bare metal, or Chris Patterson in comment #2 describes it as affecting between ~0.3% to 2% of deployments on Microsoft Azure. Azure uses dhclient called from cloud-init instead of systemd-networkd, and this is causing issues with larger deployments. The logs of an affected dhclient produce the following: Listening on LPF/enp1s0/52:54:00:1c:d7:00 Sending on LPF/enp1s0/52:54:00:1c:d7:00 Sending on Socket/fallback DHCPDISCOVER on enp1s0 to 255.255.255.255 port 67 interval 3 (xid=0xd222950f) DHCPDISCOVER on enp1s0 to 255.255.255.255 port 67 interval 5 (xid=0xd222950f) ... (omitting 20 similar lines) ... DHCPDISCOVER on enp1s0 to 255.255.255.255 port 67 interval 13 (xid=0xd222950f) DHCPDISCOVER on enp1s0 to 255.255.255.255 port 67 interval 8 (xid=0xd222950f) DHCPDISCOVER on enp1s0 to 255.255.255.255 port 67 interval 6 (xid=0xd222950f) No DHCPOFFERS received. No working leases in persistent database - sleeping. Full log: https://paste.ubuntu.com/p/8yBfw2KR5h/ Log of a working run: https://paste.ubuntu.com/p/N3ZgqrxyQD/ The bizarre thing is when you tcpdump dhclient, we see all DHCPDISOVER packets being replied to with DHCPOFFER packets, but the got_one() callback is never called, dhclient does not read these DHCPOFFER packets, and continues sending DHCPDISCOVER packets. Once it reaches 25 DHCPDISCOVER packets sent, it gives up. tcpdump: Screenshot of Wireshark: This behaviour led several bug reporters to believe it was a kernel issue, with the kernel not pushing DHCPOFFER packets to dhclient. This is not the case, the actual problem is dhclient containing a thread concurrency race condition, and when the race occurs, the read socket is closed prematurely, and dhclient does not read any of the DHCPOFFER replies. The full explanation is in the "Other Info" section, but the fix is to add a mutex that restricts access to the global linked list of open sockets, and ensures that a newly created socket is added to this list, before the socketmanager callback has an opportunity to walk this list when there is data immediately able to be read. Mauricio has provided such a patch, and includes options to disable this behaviour during runtime to minimise regression risk. [Testcase] Reproducer based on GDB and DHCP noise injection. It uses 3 veth pairs (DHCP server/client/injector, the latter two under namespaces) on a linux bridge. LXD VM: $ lxc launch ubuntu:focal lp1926139-focal --vm $ lxc shell lp1926139-focal Network Setup: # ip link add br0 type bridge # ip link set br0 up # ip link add veth0 type veth peer name veth0br # ip link set veth0 up # ip link set veth0br up master br0 # ip netns add ns1 # ip link add veth1 netns ns1 type veth peer name veth1br # ip -n ns1 link set veth1 up # ip link set veth1br up master br0 # ip netns add ns2 # ip link add veth2 netns ns2 type veth peer name veth2br # ip -n ns2 link set veth2 up # ip link set veth2br up master br0 Network Check: # ip link show type veth | grep veth 5: veth0br@veth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br0 state UP mode DEFAULT group default qlen 1000 6: veth0@veth0br: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000 7: veth1br@if2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br0 state UP mode DEFAULT group default qlen 1000 8: veth2br@if2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br0 state UP mode DEFAULT group default qlen 1000 # ip -n ns1 link show type veth | grep veth 2: veth1@if7: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000 # ip -n ns2 link show type veth | grep veth 2: veth2@if8: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000 DHCP Server Setup: # apt install -y isc-dhcp-server # ip addr add 192.168.42.1/24 dev veth0 # echo 'INTERFACESv4="veth0"' >>/etc/default/isc-dhcp-server # cat <<EOF >>/etc/dhcp/dhcpd.conf subnet 192.168.42.0 netmask 255.255.255.0 { range 192.168.42.100 192.168.42.200; } EOF # systemctl restart isc-dhcp-server.service # systemctl status isc-dhcp-server.service | grep Active: Active: active (running) since Thu 2023-01-19 02:06:18 UTC; 19s ago # ss -nlp | grep 0.0.0.0:67 udp UNCONN 0 0 0.0.0.0:67 0.0.0.0:* users:(("dhcpd",pid=3279,fd=9)) DHCP Server Check: # ip netns exec ns1 \ dhclient -v veth1 ... DHCPDISCOVER on veth1 to 255.255.255.255 port 67 interval 3 (xid=0xd147ab17) DHCPOFFER of 192.168.42.100 from 192.168.42.1 DHCPREQUEST for 192.168.42.100 on veth1 to 255.255.255.255 port 67 (xid=0x17ab47d1) DHCPACK of 192.168.42.100 from 192.168.42.1 (xid=0xd147ab17) bound to 192.168.42.100 -- renewal in 245 seconds. # ip netns exec ns1 \ dhclient -v veth1 -r ... DHCPRELEASE of 192.168.42.100 on veth1 to 192.168.42.1 port 67 (xid=0x1cd4aacf) DHCP Noise Setup: # ip -n ns2 addr add 192.168.42.2/24 dev veth2 # ip netns exec ns2 \ /bin/sh -c 'while sleep 0.1; do echo; done | nc -u -v -b -s 192.168.42.2 -p 67 255.255.255.255 68' & Connection to 255.255.255.255 68 port [udp/bootpc] succeeded! i.e., every 0.1 seconds, broadcast a message as DHCP (port 67) to DHCP client receive (port 68). DHCP Noise Check: # tcpdump -i veth0 -n 'udp and host 255.255.255.255' -c 10 ... 02:13:26.993233 IP 192.168.42.2.67 > 255.255.255.255.68: BOOTP/DHCP, unknown (0x0a) [|bootp] 02:13:27.098317 IP 192.168.42.2.67 > 255.255.255.255.68: BOOTP/DHCP, unknown (0x0a) [|bootp] 02:13:27.205879 IP 192.168.42.2.67 > 255.255.255.255.68: BOOTP/DHCP, unknown (0x0a) [|bootp] 02:13:27.314234 IP 192.168.42.2.67 > 255.255.255.255.68: BOOTP/DHCP, unknown (0x0a) [|bootp] 02:13:27.424486 IP 192.168.42.2.67 > 255.255.255.255.68: BOOTP/DHCP, unknown (0x0a) [|bootp] 02:13:27.532431 IP 192.168.42.2.67 > 255.255.255.255.68: BOOTP/DHCP, unknown (0x0a) [|bootp] 02:13:27.639614 IP 192.168.42.2.67 > 255.255.255.255.68: BOOTP/DHCP, unknown (0x0a) [|bootp] 02:13:27.747633 IP 192.168.42.2.67 > 255.255.255.255.68: BOOTP/DHCP, unknown (0x0a) [|bootp] 02:13:27.864037 IP 192.168.42.2.67 > 255.255.255.255.68: BOOTP/DHCP, unknown (0x0a) [|bootp] 02:13:27.977402 IP 192.168.42.2.67 > 255.255.255.255.68: BOOTP/DHCP, unknown (0x0a) [|bootp] ... GDB Reproducer (original package): ============== # apt install -y gdb Capture DHCP Server's UDP packets for reference: # tcpdump -i veth0 -n 'udp and host 192.168.42.1' -w veth0-udp-192-168-42-1.pcap & pid=$! Debug symbols: # wget https://launchpad.net/ubuntu/+archive/primary/+files/isc-dhcp-client-dbgsym_4.4.1-2.1ubuntu5.20.04.4_amd64.ddeb # apt install -y ./isc-dhcp-client-dbgsym_4.4.1-2.1ubuntu5.20.04.4_amd64.ddeb Source code line numbers (for breakpoint): 198 isc_result_t omapi_register_io_object (omapi_object_t *h, ... 260 status = isc_socket_fdwatchcreate(dhcp_gbl_ctx.socketmgr, ... 278 /* Find the last I/O state, if there are any. */ 279 for (p = omapi_io_states.next; Reproduce the issue with a delay introduced via breakpoint on line 279: # ip netns exec ns1 \ gdb -ex 'set target-async on' -ex 'set non-stop on' -ex 'set pagination off' -ex 'set confirm off' -q dhclient (gdb) break omapip/dispatch.c:279 (gdb) commands shell sleep 0.2 continue end (gdb) run -v -d veth1 ... Listening on LPF/veth1/ea:7a:1d:d1:53:59 Sending on LPF/veth1/ea:7a:1d:d1:53:59 Thread 1 "dhclient" hit Breakpoint 1, omapi_register_io_object ... Sending on Socket/fallback Thread 1 "dhclient" hit Breakpoint 1, omapi_register_io_object ... 279 in dispatch.c DHCPDISCOVER on veth1 to 255.255.255.255 port 67 interval 3 (xid=0xe3b19607) DHCPDISCOVER on veth1 to 255.255.255.255 port 67 interval 8 (xid=0xe3b19607) DHCPDISCOVER on veth1 to 255.255.255.255 port 67 interval 13 (xid=0xe3b19607) DHCPDISCOVER on veth1 to 255.255.255.255 port 67 interval 18 (xid=0xe3b19607) ^C ... (gdb) quit The tcpdump confirms the DHCP Server _sent_ DHCP Offer packets, not handled by the DHCP Client. # kill $pid 4 packets captured 4 packets received by filter 0 packets dropped by kernel [2]+ Done tcpdump -i veth0 -n 'udp and host 192.168.42.1' -w veth0-udp-192-168-42-1.pcap # tcpdump -i veth0 -n 'udp and host 192.168.42.1' -r veth0-udp-192-168-42-1.pcap -v ... 192.168.42.1.67 > 192.168.42.100.68: BOOTP/DHCP, Reply, length 300, xid 0xe3b19607, Flags [none] Your-IP 192.168.42.100 ... DHCP-Message Option 53, length 1: Offer ... 192.168.42.1.67 > 192.168.42.100.68: BOOTP/DHCP, Reply, length 300, xid 0xe3b19607, secs 4, Flags [none] Your-IP 192.168.42.100 ... DHCP-Message Option 53, length 1: Offer ... 192.168.42.1.67 > 192.168.42.100.68: BOOTP/DHCP, Reply, length 300, xid 0xe3b19607, secs 12, Flags [none] Your-IP 192.168.42.100 ... DHCP-Message Option 53, length 1: Offer ... 192.168.42.1.67 > 192.168.42.100.68: BOOTP/DHCP, Reply, length 300, xid 0xe3b19607, secs 25, Flags [none] Your-IP 192.168.42.100 ... DHCP-Message Option 53, length 1: Offer ... GDB Reproducer (patched package): ============== Client & Debug symbols: # wget \ https://launchpad.net/~mfo/+archive/ubuntu/lp1926139/+files/isc-dhcp-client_4.4.1-2.1ubuntu5.20.04.4+lp1926139.1_amd64.deb \ https://launchpad.net/~mfo/+archive/ubuntu/lp1926139/+files/isc-dhcp-client-dbgsym_4.4.1-2.1ubuntu5.20.04.4+lp1926139.1_amd64.ddeb # sudo apt install \ ./isc-dhcp-client_4.4.1-2.1ubuntu5.20.04.4+lp1926139.1_amd64.deb \ ./isc-dhcp-client-dbgsym_4.4.1-2.1ubuntu5.20.04.4+lp1926139.1_amd64.ddeb Source code line numbers (for breakpoint): 253 isc_result_t omapi_register_io_object (omapi_object_t *h, ... 324 status = isc_socket_fdwatchcreate(dhcp_gbl_ctx.socketmgr, ... 343 /* Find the last I/O state, if there are any. */ 344 for (p = omapi_io_states.next; Attempt to reproduce the issue again, the same way, with a delay introduced via breakpoint on line 344: # ip netns exec ns1 \ gdb -ex 'set target-async on' -ex 'set non-stop on' -ex 'set pagination off' -ex 'set confirm off' -q dhclient (gdb) break omapip/dispatch.c:344 (gdb) commands shell sleep 0.2 continue end (gdb) run -v -d veth1 ... Listening on LPF/veth1/ea:7a:1d:d1:53:59 Sending on LPF/veth1/ea:7a:1d:d1:53:59 Thread 1 "dhclient" hit Breakpoint 1, omapi_register_io_object ... Waiting for object registration to finish... (This can be disabled with: <VAR>/<cmdline>) Sending on Socket/fallback Object registration finished. Thread 1 "dhclient" hit Breakpoint 1, omapi_register_io_object ... 344 in dispatch.c DHCPDISCOVER on veth1 to 255.255.255.255 port 67 interval 3 (xid=0x13d35e3b) DHCPOFFER of 192.168.42.100 from 192.168.42.1 DHCPREQUEST for 192.168.42.100 on veth1 to 255.255.255.255 port 67 (xid=0x3b5ed313) DHCPACK of 192.168.42.100 from 192.168.42.1 (xid=0x13d35e3b) [Detaching after fork from child process 15283] bound to 192.168.42.100 -- renewal in 252 seconds. ^C ... (gdb) quit The issue did not happen! The DHCP client successfully acquired a DHCP address (above). It can even be released later, outside of GDB (below). # ip netns exec ns1 \ dhclient -v veth1 -r ... DHCPRELEASE of 192.168.42.100 on veth1 to 192.168.42.1 port 67 (xid=0x70f6c778) [Where problems could occur] isc-dhcp is a core package, and any change comes with the risk that users would not be able to receive dhcp leases with dhclient, leaving their systems with no IP address and unreachable, and could potentially cripple images that depend on it, e.g. Microsoft Azure uses dhclient called from cloud-init, instead of systemd-networkd, so a regression could potentially affect all Ubuntu users on Azure. Additionally, the code is called whenever sockets are constructed, and isc-dhcp-server could also be affected. We have mitigated the risks of regression as best as possible by adding as much detail as possible to this launchpad bug, so it is clear how the race operates and how the patch fixes the issue. Mauricio has additionally added a environment variable and a kernel command line parameter, that when present, disables the mutex from operating. If a regression were to occur, users can add these parameters to their deployments to work around any issues. Mauricio and Matthew have decided that the mutex route is best in terms of lessening regression risk, as the alternate solution would be to disable threading on bind9-libs. Disabling threading on bind9-libs, while complete as a solution, and removes the risk of a future regression caused by thread concurrency issues that are currently undetected, comes with the fact that it removes publicly exported symbols from bind9-libs, and adds others, and changes the entire library from multithreaded to single threaded. If any users happen to use bind9-libs outside of isc-dhcp, they would see their applications either fail to work due to missing symbols, or performance would change. Disabling threading on bind9-libs is shelved, and can be looked at in the future if necessary. Back to the mutex solution, Chris Patterson, has been testing this solution at scale on Azure, and in 13k instances, has not had a failure. With the gdb reproducer, we are confident that adding the mutex will not prevent other parts of the software from functioning correctly. [Other info] I was reading around the upstream issue trackers, and found the following two bug reports: https://gitlab.isc.org/isc-projects/dhcp/-/issues/264 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=996356 The ISC upstream report was actually quite detailed, and it has the same symptoms of what we are experiencing. Let's have a look at the root cause. The code I am using is isc-dhcp 4.4.1-2.1ubuntu5.20.04.4 from Focal. common/discover.c 567 void 568 discover_interfaces(int state) { ... 1002 case AF_INET: 1003 default: 1004 status = omapi_register_io_object((omapi_object_t *)tmp, 1005 if_readsocket, 1006 0, got_one, 0, 0); 1007 break; 1008 } ... In discover.c, we call discover_interfaces() to iterate over the interfaces, and attempt to register a raw socket against it. We do this by calling omapi_register_io_object() which is used for reading data, and calls the elusive got_one() callback that you instrumented your code to see if it was being called or not. omapip/dispatch.c 196 /* Register an I/O handle so that we can do asynchronous I/O on it. */ 197 198 isc_result_t omapi_register_io_object (omapi_object_t *h, 199 int (*readfd) (omapi_object_t *), 200 int (*writefd) (omapi_object_t *), 201 isc_result_t (*reader) 202 (omapi_object_t *), 203 isc_result_t (*writer) 204 (omapi_object_t *), 205 isc_result_t (*reaper) 206 (omapi_object_t *)) 207 { ... 241 /* 242 * Attach the I/O object to the isc socket library via the 243 * fdwatch function. This allows the socket library to watch 244 * over a socket that we built. If there are both a read and 245 * a write socket we asssume they are the same socket. 246 */ 247 248 if (readfd) { 249 fd_flags |= ISC_SOCKFDWATCH_READ; 250 fd = readfd(h); 251 } ... 257 258 if (fd_flags != 0) { 259 status = isc_socket_fdwatchcreate(dhcp_gbl_ctx.socketmgr, 260 fd, fd_flags, 261 omapi_iscsock_cb, 262 obj, 263 dhcp_gbl_ctx.task, 264 &obj->fd); ... 275 } 276 277 278 /* Find the last I/O state, if there are any. */ 279 for (p = omapi_io_states.next; 280 p && p -> next; p = p -> next) 281 ; 282 if (p) 283 omapi_io_reference (&p -> next, obj, MDL); 284 else 285 omapi_io_reference (&omapi_io_states.next, obj, MDL); ... omapi_register_io_object() is called for each socket created, in this case, the if_readsocket from discover_interfaces(). The file descriptor is assigned ISC_SOCKFDWATCH_READ, and we enter the if statement. The if statement calls isc_socket_fdwatchcreate(), which registers the socket with the ISC socket manager, and sets up the callback omapi_iscsock_cb(), to be called. Once that has been done, we iterate over the omapi_io_states linked list, which is a global list of registered sockets. We get to the end of the list (or the beginning, if the list is empty), and add the socket to the list. Now, the bug happens between calling isc_socket_fdwatchcreate() to register the socket with the socket manager, and adding it to the global linked list. Sometimes, the callback omapi_iscsock_cb() is called inbetween. omapip/dispatch.c 101 /* 102 * Callback routine to connect the omapi I/O object and socket with 103 * the isc socket code. The isc socket code will call this routine 104 * which will then call the correct local routine to process the bytes. 105 * 106 * Currently we are always willing to read more data, this should be modified 107 * so that on connections we don't read more if we already have enough. 108 * 109 * If we have more bytes to write we ask the library to call us when 110 * we can write more. If we indicate we don't have more to write we need 111 * to poke the library via isc_socket_fdwatchpoke. 112 */ ... 118 #define SOCKDELETE 1 119 int 120 omapi_iscsock_cb(isc_task_t *task, 121 isc_socket_t *socket, 122 void *cbarg, 123 int flags) 124 { ... 132 #if SOCKDELETE 133 /* 134 * walk through the io states list, if our object is on there 135 * service it. if not ignore it. 136 */ 137 for (obj = omapi_io_states.next; obj != NULL; obj = obj->next) { 138 if (obj == cbarg) 139 break; 140 } 141 142 if (obj == NULL) { 143 return(0); 144 } 145 #else ... 164 if ((flags == ISC_SOCKFDWATCH_READ) && 165 (obj->reader != NULL) && 166 (obj->inner != NULL)) { 167 status = obj->reader(obj->inner); 168 /* 169 * If we are shutting down (basically tried to 170 * read and got no bytes) we don't need to try 171 * again. 172 */ 173 if (status == ISC_R_SHUTTINGDOWN) 174 return (0); 175 /* Otherwise We always ask for more when reading */ 176 return (1); ... 188 /* 189 * We get here if we either had an error (inconsistent 190 * structures etc) or no more to write, tell the socket 191 * lib we don't have more to do right now. 192 */ 193 return (0); 194 } When omapi_iscsock_cb() is called, we iterate over that same omapi_io_states global linked list, and since the raw socket we are about to add is the very first item going to be placed on the list, omapi_io_states.next will be NULL, making obj set to NULL. Well what happens when obj is NULL? We return 0. 142 if (obj == NULL) { 143 return(0); 144 } If you look down the code a little further, we see that if we are finished with the socket, like shutting down, or an error happens, we return 0 to indicate that we are done with this socket, and won't be needing it anymore, and won't be using it again. If we return 1, then we ask for more data later on, and omapi_iscsock_cb() will be called again in the future. So, by returning 0, we will no longer read any packets from the socket, and thus, we simply ignore and will never read any DHCPOFFER packets. We obviously have two sockets open, one for reading and one for writing, since one is bound to port 67 and the other to port 68, so we keep sending out DHCPDISCOVER packets, not knowing we are ignoring all DHCPOFFERS due to the read socket being closed and not calling omapi_iscsock_cb() ever again. So, as explained on the upstream bug, what is needed for this race condition to occur? 1) There needs to be data that can be read immediately by the socket. This is how omapi_iscsock_cb() is called, when there is data waiting. If there is no data to read, then the race can't happen. 2) Thread scheduling must occur in a particular order. There are three threads: a. The main thread, which is registering the socket b. The socket manager coordinator thread c. A socket manager worker thread For the race to occur, we need to switch from a) to b) to schedule the callback, b) to c) to call the callback and return 0, all before we return from c) to a) to add the socket to the omapi_io_states linked list. To verify this, I added some print statements to omapi_iscsock_cb() and omapi_register_io_object() to see what is happening: https://paste.ubuntu.com/p/hGsssrVyG4/ I instrumented entry to the callback, as well as if obj is NULL, and before and after the socket is registered to the socket manager, and before and after the socket is added to the global linked list. I built the new dhclient, and ran test-parallel.sh, since it by far is the best at reproducing the issue. I concatenated all 20 /tmp/dhclient-* logs to read: https://paste.ubuntu.com/p/VddddSmdMV/ If we look at one that works and gets the DHCPOFFER, we see: https://paste.ubuntu.com/p/dfdvNM3RDd/ We have two sockets, one that reads and one that writes. It registers with the socket manager, adds the socket to the linked list, for both sockets, one after the other, and then the DHCPDISOVER is set, and then callbacks are called. Now, when the issue reproduces: https://paste.ubuntu.com/p/77BNNhDwdh/ We see that we register the read socket with the socket manager, and immediately get a callback to omapi_iscsock_cb(), so there is likely a packet to read already. We return NULL, since the socket is not on the linked list yet, and strangely this happens twice when we have only entered omapi_iscsock_cb() once. We then add the socket to the linked list, showing we have hit the race condition. The writer socket is added to the socket manager, but does not race, as it is added to the linked list before the callback happens. The callback only seems to be called for the writer socket, and we ignore all DHCPOFFER packets, only sending DHCPDISCOVER packets. I ran the test-parallel.sh script a few times, and each and every time the issue reproduced, we had a NULL linked list, and returned 0 from omapi_iscsock_cb(). So I am confident we have come across the root cause. Now, I had an idea of adding a sleep between registering to the socket manager and adding the socket to the linked list, to try and get every single agent to fail 100% of the time, hoping that the callback would be called first. The change is something like the likes of below: https://paste.ubuntu.com/p/8zJ2FQK99X/ But after I built it and ran it a few times, I couldn't reproduce the issue at all. A typical run is below: https://paste.ubuntu.com/p/k6wRhx4RCM/ We can see that everything happens in the correct order, and the issue is not reproduced. I think because each dhclient has to wait 2 seconds before sending a DHCPDISCOVER, the network is quiet, and there is no packet to read immediately, since neighboring agents are also quiet, so the callback is not called, and the socket is added to the linked list before the network gets busy. The code itself to add the socket to the linked list was added in the below commit, 22 years ago: commit 61b844bfd7641a62d681a1f70d3b6dbc485ce4b6 From: Ted Lemon <sou...@isc.org> Date: Thu, 2 Sep 1999 00:32:56 +0000 Subject: Omapi library, initial checkin Link: https://gitlab.isc.org/isc-projects/dhcp/-/commit/61b844bfd7641a62d681a1f70d3b6dbc485ce4b6 Later on, the registration to the socket manager and the callback was added 13 years ago: commit 98bf16077d22f28e288a18e184a9d1f97cb5f4f7 From: Shawn Routhier <s...@isc.org> Date: Wed, 28 Oct 2009 04:12:30 +0000 Subject: Support for asynchronous ddns per ticket 19216 - convert to using isclib and dnslib. Link: https://gitlab.isc.org/isc-projects/dhcp/-/commit/98bf16077d22f28e288a18e184a9d1f97cb5f4f7 Finally, the null linked list check in the callback that returns 0 was also added 13 years ago: commit 8fa0112dd11ee301046b42fe463074b067e61a35 From: Shawn Routhier <s...@isc.org> Date: Thu, 19 Nov 2009 23:49:57 +0000 Subject: Ticket 20540 - clean ups for DHCP-DDNS work, add an change dropped in the merge, arrange to handle callbacks from the socket code after we've deleted the socket and deal with the quantum issue in the tasks. This last will be removed shortly as a better fix is now available. Link: https://gitlab.isc.org/isc-projects/dhcp/-/commit/8fa0112dd11ee301046b42fe463074b067e61a35 This code and thus the bug is present in all versions of Ubuntu from 10.04 LTS onward. However, I could not reproduce on Bionic, Kinetic or Lunar, so I looked into why this only seems to affect Focal and Jammy, when all versions share the same buggy code. It appears that Focal and Jammy dhclient is multithreaded: $ sudo ps -T -p 19512 PID SPID TTY TIME CMD 19512 19512 ? 00:00:00 dhclient 19512 19519 ? 00:00:00 isc-worker0000 19512 19521 ? 00:00:00 isc-socket 19512 19522 ? 00:00:00 isc-timer While on Bionic, Kinetic and Lunar, it presents only a single thread: $ sudo ps -T -p 23894 PID SPID TTY TIME CMD 23894 23894 ? 00:00:00 dhclient You can't have thread concurrency issues if you run as a single thread. The race conditions simply did not happen, since everything had to execute in order, which is why this bug has existed for 13 years in its current form. Chris Patterson in comment #2 mentions when he built dhclient from the latest Debian source, available here: https://salsa.debian.org/debian/isc-dhcp/-/commits/master/debian Chris mentions that it solves the problem, and that it uses in-tree bind libraries. Looking into this, we see the tree has bind 9.11.36: https://salsa.debian.org/debian/isc- dhcp/-/blob/master/bind/version.tmp and its makefile explicitly shows threads being disabled: https://salsa.debian.org/debian/isc- dhcp/-/blob/master/bind/Makefile.in bindconfig = ... --disable-threads ... bind 9.11.36 still supports disabling threads. Hence this is how the upstream debian build did not reproduce the issue on Focal, since threading was disabled and dhclient ran as a single thread. On Kinetic and Lunar, the isc-dhcp package seems to track the debian upstream version, with the very same in-tree bind libraries, set to --disable-threads, which is why it is fixed in those versions. So, we have two options for a fix for Focal and Jammy: 1) We disable threading for dhclient. 2) We add in a mutex to resolve this particular concurrency issue. Looking at the source code, there is no mutexes or semaphores. pthread isn't even a dependency, and it is not linked in. There is no thread synchronisation primitives at all. Initially Matthew proposed 1) as the solution. It seems isc-dhcp on Focal and Jammy are both incompatible with their native bind9 packages, and instead, use the libraries from bind9-libs, a separate package that packages 9.11.16 for Focal and 9.11.19 for Jammy, to work around the incompatibility issue. https://launchpad.net/ubuntu/+source/bind9-libs Looking at the dependencies for isc-dhcp in Focal: $ apt depends isc-dhcp-client isc-dhcp-client Depends: libc6 (>= 2.15) Depends: libdns-export1109 Depends: libisc-export1105 Depends: debianutils (>= 2.8.2) Depends: iproute2 Recommends: isc-dhcp-common Suggests: resolvconf openresolv Suggests: avahi-autoipd Suggests: isc-dhcp-client-ddns We see we depend on libdns-export1109 and libisc-export1105 from bind9-libs. Looking at those reverse dependencies: $ apt rdepends libisc-export1105 libisc-export1105 Reverse Depends: Depends: libbind-export-dev (= 1:9.11.16+dfsg-3~ubuntu1) Depends: isc-dhcp-client Depends: isc-dhcp-server-ldap Depends: isc-dhcp-relay Depends: isc-dhcp-client-ddns Depends: libisccfg-export163 Depends: libisccc-export161 Depends: libirs-export161 Depends: libdns-export1109 Depends: libbind-export-dev (= 1:9.11.16+dfsg-3~build1) Depends: isc-dhcp-server Depends: isc-dhcp-client Depends: isc-dhcp-server-ldap Depends: isc-dhcp-relay Depends: isc-dhcp-client-ddns Depends: libisccfg-export163 Depends: libisccc-export161 Depends: libirs-export161 Depends: libdns-export1109 Depends: isc-dhcp-client Depends: isc-dhcp-server It seems it is only isc-dhcp is a reverse dependency. So it appears perfectly safe to change bind9-libs from --enable- threads to --disable-threads. Looking at their debian/rules files: https://git.launchpad.net/ubuntu/+source/bind9-libs/tree/debian/rules?h=applied/ubuntu/focal-proposed https://git.launchpad.net/ubuntu/+source/bind9-libs/tree/debian/rules?h=applied/ubuntu/jammy-devel We see: CONFIGURE_COMMON := \ ... --disable-threads \ ... --enable-threads \ ... It appears there has been a mistake when setting up the configure options, and both --disable-threads and --enable-threads is set. Because of the way configure is set up --enable-threads will always win. The fix would be a one line change, to remove --enable-threads. However, this is a unacceptably high regression risk, due to the fact that building bind9-libs with --disable-threads means we remove publicly exported symbols from libraries: https://bugs.launchpad.net/ubuntu/+source/isc-dhcp/+bug/1926139/+attachment/5641515/+files/lp1926139_focal.debdiff https://bugs.launchpad.net/ubuntu/+source/isc-dhcp/+bug/1926139/+attachment/5641516/+files/lp1926139_jammy.debdiff As an alternative, Mauricio developed 2), which is to add a mutex that restricts access to the global socket list, ensuring that sockets are added to the list before a callback is allowed to walk the list and read its entries. https://launchpadlibrarian.net/646801520/lp1926139_focal_isc- dhcp.debdiff Mauricio's solution is elegant as it reuses an unused variable, obj->closed, as a mutex, and uses a compiler built-in memory barrier, __sync_synchronize(), meaning that there is no need to link libpthread or add any extra thread synchronisation primitives. This has been tested with 13k VM deployments on Microsoft Azure, and has found to work as expected with no failures, meaning risk of additional race conditions we are not aware of is low. The reason why this patch was not forwarded upstream, is that isc-dhcp is now officially End Of Life, and has effectively been abandoned by upstream. You can read about it in these notices: https://lists.isc.org/pipermail/dhcp-users/2022-October/022786.html https://www.isc.org/blogs/isc-dhcp-eol/ Upstream won't fix any more bugs, make any new releases, or even accept any new commits. They are putting their efforts into isc-kea now. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bind9-libs/+bug/1926139/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
