Seems PA is getting the correct active port:
$ pactl list sinks
Sink #0
State: SUSPENDED
Name: sink.primary
Description: Droid sink primary
Driver: module-droid-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 4
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100%
/ 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: sink.primary.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
device.description = "Droid sink primary"
device.class = "sound"
device.form_factor = "internal"
droid.hw_module = "primary"
device.icon_name = "audio-card"
Ports:
output-earpiece: Output to earpiece (priority: 200)
output-speaker: Output to speaker (priority: 300)
output-wired_headset: Output to wired headset (priority: 400,
not available)
output-wired_headphone: Output to wired headphone (priority:
400, not available)
output-bluetooth_sco: Output to bluetooth sco (priority: 100)
output-sco_headset: Output to sco headset (priority: 100)
output-sco_carkit: Output to sco carkit (priority: 100)
output-aux_digital: Output to aux digital (priority: 100)
output-analog_dock_headset: Output to analog dock headset
(priority: 100)
output-digital_dock_headset: Output to digital dock headset
(priority: 100)
output-fm_tx: Output to fm tx (priority: 200)
output-speaker+wired_headphone: Output to speaker+wired
headphone (priority: 100)
output-parking: Parking port (priority: 50)
Active Port: output-speaker
Formats:
pcm
Sink #1
State: SUSPENDED
Name: sink.fake.sco
Description: Null Output
Driver: module-null-sink.c
Sample Specification: s16le 1ch 8000Hz
Channel Map: mono
Owner Module: 5
Mute: no
Volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: sink.fake.sco.monitor
Latency: 0 usec, configured 0 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Null Output"
device.class = "abstract"
device.icon_name = "audio-card"
Formats:
pcm
Then plugging in a headphone goes to:
$ pactl list sinks
Sink #0
State: SUSPENDED
Name: sink.primary
Description: Droid sink primary
Driver: module-droid-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 4
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100%
/ 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: sink.primary.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
device.description = "Droid sink primary"
device.class = "sound"
device.form_factor = "internal"
droid.hw_module = "primary"
device.icon_name = "audio-card"
Ports:
output-earpiece: Output to earpiece (priority: 200)
output-speaker: Output to speaker (priority: 300)
output-wired_headset: Output to wired headset (priority: 400,
not available)
output-wired_headphone: Output to wired headphone (priority:
400, available)
output-bluetooth_sco: Output to bluetooth sco (priority: 100)
output-sco_headset: Output to sco headset (priority: 100)
output-sco_carkit: Output to sco carkit (priority: 100)
output-aux_digital: Output to aux digital (priority: 100)
output-analog_dock_headset: Output to analog dock headset
(priority: 100)
output-digital_dock_headset: Output to digital dock headset
(priority: 100)
output-fm_tx: Output to fm tx (priority: 200)
output-speaker+wired_headphone: Output to speaker+wired
headphone (priority: 100)
output-parking: Parking port (priority: 50)
Active Port: output-wired_headphone
Formats:
pcm
Sink #1
State: SUSPENDED
Name: sink.fake.sco
Description: Null Output
Driver: module-null-sink.c
Sample Specification: s16le 1ch 8000Hz
Channel Map: mono
Owner Module: 5
Mute: no
Volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: sink.fake.sco.monitor
Latency: 0 usec, configured 0 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Null Output"
device.class = "abstract"
device.icon_name = "audio-card"
Formats:
pcm
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to indicator-sound in Ubuntu.
https://bugs.launchpad.net/bugs/1436021
Title:
max volume warning for headphones not working on all devices
Status in indicator-sound package in Ubuntu:
Triaged
Bug description:
Works fine on krillin for rtm-14.09 & vivid
does not work on Nexus4 (and other devices) on current vivid (and vivid from
a couple of weeks ago)
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/indicator-sound/+bug/1436021/+subscriptions
--
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help : https://help.launchpad.net/ListHelp
