Phil Leigh;515913 Wrote: > > If you've come here for validation then you are in for a bunch of > disappointment.
Almost as nice as mine opening > > Look let's put the cards on the table. You bought the over-priced > Welborne supply. Good for you. It will provide an improvement to the > stock supply in terms of RFI/EMI picked up by nearby equipment. You > could have achieved the same "improvement" with a mass-market PSU for > about $20 - or a used medical grade PSU for about $40-$45 - which would > be WAY better in every parameter you care to throw at it than the > Welborne. If your nearby equipment is of good quality (which I assume it > is) then it should be immune to RFI/EMI anyway. Of course almost any linear PS is adequate, and is an upgrade over El-cheapo SMPS. But Im familiar with Ron W. works as I have owned some his previous tube designs. So what the heck I pay the price. > > Yes you can use it on the Touch. It will work fine. As does the stock > supply. Good > > > ... or are you one of those folks who believes that there is no such > thing in audio terms as an SMPS that works fine? No my home theater setup contains off Meridian and ICE-power from B&O it works. > > > I have a Touch. I've measured its audio performance against an SB3 with > all manner of supplies (as have others on here). > > I have learnt not to trust my "golden ears", especially when I have an > investment to protect/justify. I am engineer with an eye on the meter but I have learned to trust my ears. -- baardbaard ------------------------------------------------------------------------ baardbaard's Profile: http://forums.slimdevices.com/member.php?userid=36420 View this thread: http://forums.slimdevices.com/showthread.php?t=75092
_______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
