jstraw;534050 Wrote: > Using analog outs, the line level is much louder than other components. > I have to set the volume to 75% on the Touch for it to coexist with the > signal from my other components.
You did not use the Phono input ? Other wise a pair of Rothwell -10dB attenuators would be useful (I use them all over my hifi) Or diy attenuators yourself for a couple of cents (it's two resistors they all sound the same). You also lower the percieved noise. It's recommended when correcting directly to a power amp practice if the power amp don't have any input level/gain adjustment . It's very common with to much gain everywhere and to "hot" sources. Best level off attenuation would be so that 100% volume would be as loud as you ever want to go ( when sober ;) ) but not louder. http://wiki.slimdevices.com/index.php/Connect_To_PowerAmp http://wiki.slimdevices.com/index.php/DIYPassiveAttenuation -- Mnyb -------------------------------------------------------------------- Main hifi: SB3 (soon to replaced by a Touch :) It is on preorder) Bedroom/Office: Boom Kitchen: Receiver (soon to be replaced by my SB3 and the SBR to be stuffed in a box in the attic ) Miscellaneous use: Radio (battery pack to be ordered) I use a Controller various ir-remotes and a Eee-PC with squeezeplay to control this ------------------------------------------------------------------------ Mnyb's Profile: http://forums.slimdevices.com/member.php?userid=4143 View this thread: http://forums.slimdevices.com/showthread.php?t=77225 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
