liffy99;690694 Wrote: > I've installed a Buffalo wireless bridge to provide an Ethernet feed to > the Touch. It shows it is connected to my wifi network. Then disabled > the WLAN on the TOUCH ( tt -WLAN from ssh) and plugged a cable from the > bridge to the Touch. Now I can't see the Touch on the network at all! > As I have also disabled the IR remote control and screen I'm a bit > stuck - neither can I get access using the WINSPC / putty programme I > used to install Souncheck's mods. > Any idea where I have gone wrong ?
Hold the little button on the back in for about a minute... -- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal... Touch(wired/W7)+Teddy Pardo PSU - Audiolense 3.3/2.0+INGUZ DRC - MF M1 DAC - Linn 5103 - full Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Pekin Tuner, Townsend Supertweeters,VdH Toslink,Kimber 8TC Speaker & Chord Signature Plus Interconnect cables Stax4070+SRM7/II phones Kitchen Boom, Outdoors: SB Radio, Harmony One remote for everything. ------------------------------------------------------------------------ Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=76291 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
