JohnSwenson wrote: 
> One of the big differences in My PS design VS the switcher and with many
> other linear designs is the major reduction in noise sent down the AC
> mains, so it may be less noise in the AC going to a power amp rather
> than the signal from the Touch. 
> 
> The noise that this design gets rid of can cause IMD with high frequency
> components of your audio signal. For your piano attack this would cause
> a "sprinkling" of high frequency components around the attack, which you
> very well might hear as a "softening" of the attack. As was mentioned
> above this might actually be happening in the power amp rather than the
> Touch itself. 
> 
> You have two choices now: go  back to the way it was if you like that
> better, OR realize that with the new supply things are theoretically
> better and work on the rest of the system to improve it's transient
> response. 
> 
> The latter is what I took up about 10 years ago. I realized that really
> good transient response was what was missing from my system and started
> tracking down what the culprits were and how to fix them. The result is
> that I have now built all my own speakers, amps, preamps, DACs, power 
> cords, interconnects etc. The current system now has exceptionally good
> transient response and sounds amazing. But it wasn't easy to get there. 
> 
> Along the way I found that a lot of audio equipment compresses
> transients, it seems to be something that a lot of designers kind of
> sweep under the rug. And it's not something that most audiophiles are
> prioritizing when selecting components so the designers don't feel a
> need to really spend a lot of effort on. 
> 
> BTW I'm working on a new speaker design right now that is fairly small,
> inexpensive, easy to build and has very good transient response, I
> should have the prototypes built in a couple weeks. 
> 
> John S.

The question was why the stock psu had better piano attack, if I read
your explanation correctly you describe why the stock psu would have
worse attack by the introduction of high freq noise.  Am I reading that
wrong?


------------------------------------------------------------------------
m1abrams's Profile: http://forums.slimdevices.com/member.php?userid=850
View this thread: http://forums.slimdevices.com/showthread.php?t=82648

_______________________________________________
Touch mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/touch

Reply via email to