skydl wrote: 
> dmesg output:
> .......
> 
> oprofile: using arm/armv6
> TCP cubic registered
> NET: Registered protocol family 17
> RPC: Registered udp transport module.
> RPC: Registered tcp transport module.
> ieee80211: 802.11 data/management/control stack, git-1.1.13
> ieee80211: Copyright (C) 2004-2005 Intel Corporation
> <[email protected]>
> ieee80211_crypt: registered algorithm 'NULL'
> mxc_rtc mxc_rtc.0: rtc core: registered mxc_rtc as rtc0
> No external RTC clock
> Real TIme clock Driver v1.0
> mxc_rtc: probe of mxc_rtc.0 failed with error -2
> Static Power Management for Freescale i.MX35
> VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 3
> MXC Backlight Device mxc_ipu_bl.0 Initialized.
> platform mxc_rtc.0: setting system clock to 1970-01-01 00:01:02 UTC
> (62)
> VFS: Mounted root (cramfs filesystem) readonly.
> Freeing init memory: 152K
> usb 1-1: new high speed USB device using fsl-ehci and address 2
> usb 1-1: configuration #1 chosen from 2 choices
> UBIFS: recovery needed
> UBIFS: recovery completed
> UBIFS: mounted UBI device 0, volume 2, name "ubifs"
> UBIFS: file system size:   19869696 bytes (19404 KiB, 18 MiB, 154 LEBs)
> UBIFS: journal size:       1032193 bytes (1008 KiB, 0 MiB, 8 LEBs)
> UBIFS: media format:       w4/r0 (latest is w4/r0)
> UBIFS: default compressor: lzo
> UBIFS: reserved for root:  938494 bytes (916 KiB)
> FAB4 IR: fw checksum ok aa33
> firmware: requesting helper_sd.bin
> firmware: requesting sd8686.bin
> eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX.
> eth0: status: link down.
> eth0: status: link up, 100MBit Full Duplex, auto-negotiation complete.
> tsl2569: set timing: (1,2): 12
> Store Gain: 1
> Store Factor: 40
> CMD_RESP: cmd 0x801f error, result=0x1
> 
> 
> Stream0 has a lenth of 0 byte!

Is the dac attached (was it when touch was rebooted)  Can you post more
of the dmesg or mail it to me?


------------------------------------------------------------------------
Triode's Profile: http://forums.slimdevices.com/member.php?userid=17
View this thread: http://forums.slimdevices.com/showthread.php?t=94512

_______________________________________________
Touch mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/touch

Reply via email to