FredNowak wrote: > It works fine in adaptive mode. I have not listened enough to say it > works as well as coax but it is very good. Pops and clicks have not been > noticed. > > All that is needed to make the µDAC work in adaptive mode is 1. use EDO, > 2. connect the µDAC directly to the SBT (no USB hub), and 3. use the 9v > external power supply. > > Fred
I installed the EDO today on my Touch. My connection is Server->Router->Touch->W4S DAC2. Connections are Ethernet, then coax and USB from Touch to DAC. I am using a PC with Windows XP. No problem playing 24/192 files through coax, but USB does not play. I called W4S and was told the server must connect directly to the DAC. The W4S DAC comes with a driver disk and, although it seems to install from the disk, the DAC is not recognized and the drivers do not appear anywhere on the PC (where did they go?). When I plug the USB in, the W4S seems to recognize the Touch, as the display shows a sample rate of 48 kHz, which is blank when not connected. Does the uDAC come with driver disk? Possibly a difference between DAC2 and other W4S DAC's? How did you get the EDO to play in adaptive mode, as Triode says it won't? And what would be the point if you cannot use asynch with USB when coax works perfectly fine? Thanks. And a big THANK YOU to Triode for all the work and attention! --Neil ------------------------------------------------------------------------ Neil C's Profile: http://forums.slimdevices.com/member.php?userid=56099 View this thread: http://forums.slimdevices.com/showthread.php?t=94512
_______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
