shkorc wrote: > I can confirm EDO is working with an Audio-Gd 15.1 (TE8802L chip) > DAC/headphone amp using Kernel#11, thank you Triode for that! > > I then reset the Touch to factory defaults and applied the original > kernel to try with my second DAC the Nuforce DAC-9. I repeated the setup > steps like with the 15.1, except I didn't apply any of the other > kernels. For some reason the DAC is not detected during a reboot. Coax > works. > > Here are some outputs from dmesg, aplay -l and messages: > > https://dl.dropbox.com/u/1184591/dmesg.txt > https://dl.dropbox.com/u/1184591/aplay%20-l.txt > https://dl.dropbox.com/u/1184591/messages > > /proc/asound/cards is empty at 0 bytes. > > I'm trying to obtain information as to which chip is used for USB input, > to see if there's any hope of successfully pairing the two at all. > > If you have any other suggestions what else I could try, please let me > know. Thanks!
It does not look like anything is detected by linux - does the dac work with linux on a PC? It looks from their web site that the DAC requires a driver for Mac OSX - if it does then its likely it does not use standard usb audio protocols. I would recommend you ask the manufacturer if they support the UAC2 standard. ------------------------------------------------------------------------ Triode's Profile: http://forums.slimdevices.com/member.php?userid=17 View this thread: http://forums.slimdevices.com/showthread.php?t=94512 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
