Turnandcough wrote: > The lock light is on and the 192 light is red. The only sound I get is > the odd click here and there. I'm running 7.8(I thought this version was > the only one that worked with EDO) and all my files are FLAC. > > When I switch from 24/96 to 24/192 my DAC's input signal LED begins to > flicker. > > I'm using a 6 ft Blue Jeans digital coax cable. I'll try switching > cables but like I said it used to work with S/PDIF straight to DAC.
Okay, it looks as if you are getting 192kHz output to the V-Link, but that the DAC can't lock onto it for some reason. The Touch can't influence the sample rate used by the V-Link since it uses asynchronous mode, so it seems that the clock in your DAC and the clock in the V-Link are too far apart for lock to occur reliably. Either that, or the cable is bad. You could verify this by using a computer to output 192kHz material to the V-Link 192 via USB2.0. If this doesn't work either (which is what I expect), then you have to figure out whether it is your DAC or your V-link that is offset in frequency in 192kHz mode. Without instrumentation, that's going to be difficult! ------------------------------------------------------------------------ dsdreamer's Profile: http://forums.slimdevices.com/member.php?userid=12588 View this thread: http://forums.slimdevices.com/showthread.php?t=94512 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
