krochat wrote: > To disable DHCP on the VT2442 Vonage routers: > > 1) Download the VT2442 User Guide from > http://www2.vonage.com/support/files/pdf/VT2442_UserGuide.pdf > > 2) For each VT2442, log into the administration interface following the > instructions on page 13. For this to work you'll need to > a) Disconnect your desktop ethernet from the linksys. > b) Disconnect both Vonage Routers and power them down. > c) Connect your desktop ethernet cable to one of the ethernet jacks > numbered 1-4 on the back of one of the Vonage routers. > d) Power up that Vonage Router. > e) Reboot your desktop. You should be able to log into the router > and do step 3 below. > f) Repeat steps (c)-(e) for the second Vonage router. > > 3) For each Vt2442, See pages 20-21 of the User Manual for Setup->Lan > Configuration to set "Server and Relay Off" instead of one of the other > 2 DHCP settings. > > 4) Do not plug any ethernet cables into the Vonage router jacks 1-4 > except to log in to change the VT2442 configuration - they won't work > any more for normal ethernet. > > 5) Make sure to use the blue "Internet" port of the Vonage routers when > connecting them to the Linksys router. > > Good luck, > Kim > > PS - I had a friend who had endless problems with Vonage, found their > support terrible, and finally dropped them for Ooma, which he loves.
Kim, many thanks for all your help. I will do as you suggest and see if I can avoid future problems. I had no idea that Vonage was my problem. I have been very satisfied with the Vonage service. However, I may change my opinion if Vonage continues to get between me and my music. Thanks again for your tremendous help. ------------------------------------------------------------------------ jdt7385's Profile: http://forums.slimdevices.com/member.php?userid=56306 View this thread: http://forums.slimdevices.com/showthread.php?t=99456 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
