Hi Apesbrain, I have exactly the same setup, I use a Squeezebox Touch which is connected to a NAD 3020. Just some days ago I stumbled upon the firmware update provided by NAD which adds the feature you are referring to - they call it TV Connect. It was bugging me for quite some time, that I had to wake the little NAD from sleeping before playing music. The new feature sounded like the solution and ... it worked!
I connect the SB Touch with a optical to OPT1 on the NAD. I have the most recent firmware on the NAD - 2.8. It seems you have to switch on Auto Standby and Auto Sense Mode. It might also be necessary to learn the IR codes, at least thats what is described here: http://nadelectronics.com/download.php?150424095735-D3020_TVconnect_v07.pdf|D%203020%20With%20TV%20Connect I did all three and it did cost me some nerve to make sure the both auto modes are switched on. The only feedback you get is some flashing of the front panel indicators. Nevertheless, it does work flawlessly. As soon as the SB Touch sends some audio, the NAD wakes up. Just make sure of the following: 1) Firmware 2.8 is what works for me 2) Auto Sense and Standby have to be on 3) You might have to perform the IR learning but I don't see why it should be necessary (but it is also convenient - SB touch remote also controls the volume of the NAD) 4) Use the OPT1 input I can only assume that you use coax instead of optical? And another thing just come to my mind - Auto Sense only works when the NAD fell into standby automatically not if you switch it off by hand! ------------------------------------------------------------------------ xmaks's Profile: http://forums.slimdevices.com/member.php?userid=64836 View this thread: http://forums.slimdevices.com/showthread.php?t=104354 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
