. First thing I would do is verify the polarity of the plug on the new power supply. By verify I mean both ways, by the diagram on the PS as well as with a DMM. If it is reversed, not good. Some idiot on EBAY was selling really cheap power supplies he picked up on the cheap, the reason, the power cables were wired backwards before they were encapsulated and nobody caught it until after the run. Fine if you know this and cut the original plug off and install a new properly polarized plug not so good if you don't. If you have anything else plugged into the Touch, unplug them (headphones, USB Stick or Cable, RCA Jacks). Just want to be testing with a completely bare Touch.
Other then that since it doesn't work with the SB3 PS now either, it is one of two things, the Touch is dead and needs repaired (if it is not fried) or the SB3 power supply has died. Can you verify the SB3 PS still works with an SB3? *iPhone* Media Room: ModWright Platinum Signature Transporter, VTL TL-6.5 Signature Pre-Amp, Ayre MX-R Mono's, VeraStarr 6.4SE 6-channel Amp, Vandersteen Speakers: Quatro Wood Mains, VCC-5 Reference Center, four VSM-1 Signatures, Video: Runco RS 900 CineWide AutoScope 2.35:1, Vandersteen V2W Subwoofer Living Room: Transporter, ADCOM GTP-870HD, Cinepro 3K6SE III Gold, Vandersteen Model 3A Signature, Two 2Wq subs, VCC-2, Two VSM-1 Office: Touch with Vandersteen VSM-1s Kitchen: Touch in-wall mount w/ Thiel Powerpoint 1.2s Bedroom: Squeezebox BOOM Bathroom: Squeezebox Radio Around the House: SliMP3, SB1, SB2, SB3 Ford Thunderbird: SB Touch, USB drive Ford Expedition: SB Touch, USB drive ------------------------------------------------------------------------ iPhone's Profile: http://forums.slimdevices.com/member.php?userid=13622 View this thread: http://forums.slimdevices.com/showthread.php?t=108996 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
