richmaj99 wrote: > I've been using an SB Touch for years with EDO, connected via a powered > USB to an Audiolab MDAC and running LMS 7.9.2. Never had a problem. > > Then today I was fiddling with the SBT and somehow I accidentally ended > up selecting 'software update'. It updated the SBT firmware from 7.7.3 > to 7.8. > > When it finished rebooting, the EDO was gone. So I proceeded to > reinstall the EDO applet - it seems to be doing a reinstall/reboot cycle > etc, but once done, there is no "Digital Output" option in the Audio > menu. There is also no Digital Output option in the Advanced menu. > > I've tried a factory reset of the SBT, reinstalling 7.7.3 firmware... > not sure what else to try... any ideas? > > Thanks in advance... I've been running firmware fab4_7.8.0_r16754 on my touch for years, with EDO, with no problem. I've also been on 7.9 for a long time, including 7.9.2, and now on 7.9.3. I think you need to be on the 7.8 firmware, but why it isn't installing properly on yours I don't know. I redid mine about a year ago without any hiccups.
LMS 7.9.3 on PC, Xubuntu 18.04, FLACs 16->24 bit, 44.1->192kbps. 2 Touchs & EDO. LMS plugin UPnP/DLNA Bridge to MF M1 CLiC (A308CR amp & ESLs) & Marantz CR603 UPnP renderers. Also Minimserver & Upplay to same & to upmpdcli/mpd PC renderers. Squeezelite to Meridian USB Explorer DAC to PC speakers/headphones. Wireless Xubuntu 18.04 laptop firefox/upplay or Android 'phone with Squeeze-Commander/BubbleUPnP controls LMS/Minimserver. ------------------------------------------------------------------------ PasTim's Profile: http://forums.slimdevices.com/member.php?userid=41642 View this thread: http://forums.slimdevices.com/showthread.php?t=94512 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
