Hi everybody! I was following this forum until i did A BIG MISTAKE, SADLY, so i decided to write this thread. Touch (at least mine) must be powered with 5V, but i was doing a lot of thing and i used a 12V PSU....:-( So some smell of burned components went out from my (lovely) Touch. I'm not a noob in electronics, i have a laboratory and many tools (microscope, oscilloscope and so on). But... Sadly the service manual or anything about electronics is impossible to find. So i opened it and i found a component that is burnt. It is marked 0B2X, i think it is a VDO, but many models with different voltage have this SMD code. So i would need some voltage measurements into these pads: 34643 Here i removed the component 0B2X. I need voltages in the power management chip 2041B DIL also. 34644 Here there are other VDO (i think), i would need their voltage on every pin. The marked resistor becomes very hot, but i don't think it is broken. Of course every voltage must be taken when powered ON.
I know that it is quite annoying opening your Touch, but it could be a very precious help for me. No music now...:-( Any other help would be very appreciated! GM +-------------------------------------------------------------------+ |Filename: Forum 1.jpg | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=34644| +-------------------------------------------------------------------+ ------------------------------------------------------------------------ Gmnet's Profile: http://forums.slimdevices.com/member.php?userid=71752 View this thread: http://forums.slimdevices.com/showthread.php?t=114545 _______________________________________________ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
