On Thu, Sep 15, 2016 at 09:23:29AM +0300, Jarkko Sakkinen wrote:
> On Mon, Sep 12, 2016 at 04:04:19PM +0300, Tomas Winkler wrote:
> > There is a HW bug in Skylake, and Broxton PCH Intel PTT device, where
> > most of the registers in the control area except START, REQUEST, CANCEL,
> > and LOC_CTRL lost retention when the device is in the idle state. Hence
> > we need to bring the device to ready state before accessing the other
> > registers. The fix brings device to ready state before trying to read
> > command and response buffer addresses in order to remap the for access.
> > 
> > Signed-off-by: Tomas Winkler <tomas.wink...@intel.com>
> 
> Tested-by: Jarkko Sakkinen <jarkko.sakk...@linux.intel.com>
> Reviewed-by: Jarkko Sakkinen <jarkko.sakk...@linux.intel.com>

I noticed something odd or at least not described in the commit message.

> /Jarkko
> 
> > ---
> > V2: cmd read need to be called also before crb_init as this will run
> >  self test.
> > V3: resend.
> > 
> >  drivers/char/tpm/tpm_crb.c | 47 
> > ++++++++++++++++++++++++++++++++++++++--------
> >  1 file changed, 39 insertions(+), 8 deletions(-)
> > 
> > diff --git a/drivers/char/tpm/tpm_crb.c b/drivers/char/tpm/tpm_crb.c
> > index b6923a8b3ff7..e945177cf2c8 100644
> > --- a/drivers/char/tpm/tpm_crb.c
> > +++ b/drivers/char/tpm/tpm_crb.c
> > @@ -318,6 +318,7 @@ static int crb_map_io(struct acpi_device *device, 
> > struct crb_priv *priv,
> >     struct list_head resources;
> >     struct resource io_res;
> >     struct device *dev = &device->dev;
> > +   u32 pa_high, pa_low;
> >     u64 cmd_pa;
> >     u32 cmd_size;
> >     u64 rsp_pa;
> > @@ -345,12 +346,27 @@ static int crb_map_io(struct acpi_device *device, 
> > struct crb_priv *priv,
> >     if (IS_ERR(priv->cca))
> >             return PTR_ERR(priv->cca);
> >  
> > -   cmd_pa = ((u64) ioread32(&priv->cca->cmd_pa_high) << 32) |
> > -             (u64) ioread32(&priv->cca->cmd_pa_low);
> > +   /*
> > +    * PTT HW bug w/a: wake up the device to access
> > +    * possibly not retained registers.
> > +    */
> > +   ret = crb_cmd_ready(dev, priv);
> > +   if (ret)
> > +           return ret;
> > +
> > +   pa_high = ioread32(&priv->cca->cmd_pa_high);
> > +   pa_low  = ioread32(&priv->cca->cmd_pa_low);
> > +   cmd_pa = ((u64)pa_high << 32) | pa_low;
> >     cmd_size = ioread32(&priv->cca->cmd_size);
> > +
> > +   dev_dbg(dev, "cmd_hi = %X cmd_low = %X cmd_size %X\n",
> > +           pa_high, pa_low, cmd_size);
> > +
> >     priv->cmd = crb_map_res(dev, priv, &io_res, cmd_pa, cmd_size);
> > -   if (IS_ERR(priv->cmd))
> > -           return PTR_ERR(priv->cmd);
> > +   if (IS_ERR(priv->cmd)) {
> > +           ret = PTR_ERR(priv->cmd);
> > +           goto out;
> > +   }
> >  
> >     memcpy_fromio(&rsp_pa, &priv->cca->rsp_pa, 8);
> >     rsp_pa = le64_to_cpu(rsp_pa);
> > @@ -358,7 +374,8 @@ static int crb_map_io(struct acpi_device *device, 
> > struct crb_priv *priv,
> >  
> >     if (cmd_pa != rsp_pa) {
> >             priv->rsp = crb_map_res(dev, priv, &io_res, rsp_pa, rsp_size);
> > -           return PTR_ERR_OR_ZERO(priv->rsp);
> > +           ret = PTR_ERR_OR_ZERO(priv->rsp);
> > +           goto out;
> >     }
> >  
> >     /* According to the PTP specification, overlapping command and response
> > @@ -366,12 +383,18 @@ static int crb_map_io(struct acpi_device *device, 
> > struct crb_priv *priv,
> >      */
> >     if (cmd_size != rsp_size) {
> >             dev_err(dev, FW_BUG "overlapping command and response buffer 
> > sizes are not identical");
> > -           return -EINVAL;
> > +           ret = -EINVAL;
> > +           goto out;
> >     }
> > +
> >     priv->cmd_size = cmd_size;
> >  
> >     priv->rsp = priv->cmd;
> > -   return 0;
> > +
> > +out:
> > +   crb_go_idle(dev, priv);
> > +
> > +   return ret;
> >  }
> >  
> >  static int crb_acpi_add(struct acpi_device *device)
> > @@ -415,7 +438,15 @@ static int crb_acpi_add(struct acpi_device *device)
> >     if (rc)
> >             return rc;
> >  
> > -   return crb_init(device, priv);
> > +   rc  = crb_cmd_ready(dev, priv);
> > +   if (rc)
> > +           return rc;

You do this already in crb_map_io() that is called before crb_init().
What is the purpose of this extra crb_cmd_ready()? Looks unrelated at
least to the described workaround.

> > +
> > +   rc = crb_init(device, priv);
> > +   if (rc)
> > +           crb_go_idle(dev, priv);
> > +
> > +   return rc;
> >  }
> >  
> >  static int crb_acpi_remove(struct acpi_device *device)
> > -- 
> > 2.7.4

/Jarkko

------------------------------------------------------------------------------
_______________________________________________
tpmdd-devel mailing list
tpmdd-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/tpmdd-devel

Reply via email to