Hi Jason
I'm hoping you can help me with an issue i have with an ATMEL I2C
TPM. I have one connected to an DLN2 USB-I2C bus controller. Initial
probe works, i can get the capabilites in /sys/class/tpm/tpm0,
tpm_version etc:
/sys/class/tpm/tpm0# cat caps
Manufacturer: 0x41544d4c
TCG version: 1.2
Firmware version: 66.4
But i have issues with pubek and other long i2c transfers:
/sys/class/tpm/tpm0# hexdump pubek
[11621.731960] i2c i2c-11: adapter quirk: msg too long (addr 0x0029, size 314,
read)
[11621.738208] tpm tpm0: tpm_transmit: tpm_recv: error -95
The dln2 i2c bus controller has a transfer limit of 256 bytes. Getting
the pubek is doing a read for 314 bytes, which is getting rejected.
Is there any way to fragment the reads/writes? Looking at
tpm_i2c_atmel i don't see any. It seems the raw TCG commands need to
be passed in a single i2c transaction. The comment in i2c_atmel_recv()
suggests that multiple reads will always start from the beginning of
the TCG response. There are no comments in the send function, but i
guess an I2C start condition indicates the start of a new command?
Or am i missing something?
Can fragmentation happen at a higher layer?
Any other ideas?
Thanks
Andrew
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
tpmdd-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/tpmdd-devel
