On 2017-04-06 18:55, Jason Gunthorpe wrote: > On Thu, Apr 06, 2017 at 08:18:33AM +0200, Paul Menzel wrote: > >> Indeed, that improves the situation. I still need to pass `force=1` to >> the >> module to get `/dev/tpm0`. No idea, why it’s not in included in Linux >> 4.9 >> yet. > > Fair point.. Jarkko - could you forward that patch to -stable? > >> $ journalctl -k -o cat | grep tpm >> tpm_tis tpm_tis: 1.2 TPM (device-id 0x3202, rev-id 5) >> tpm tpm0: Issuing TPM_STARTUP >> tpm tpm0: [Hardware Error]: Adjusting reported timeouts: A >> 10000->10000us B >> 10000->10000us C 0->752000us D 0->752000us > > There could be more relavent kernel messages than this, try > grep -i tpm > > ?
At least I don’t spot more messages. ``` $ journalctl -b -3 -o cat | grep -i -e "Linux version" -e tpm Linux version 4.11.0-rc5+ (root@d44d03a193d6) (gcc version 6.3.0 20170321 (Debian 6.3.0-10) ) #2 SMP Tue Apr 4 21:07:08 UTC 2017 joey : TTY=pts/6 ; PWD=/home/joey ; USER=root ; COMMAND=/usr/bin/apt install tpm-tools new user: name=tss, UID=123, GID=137, home=/var/lib/tpm, shell=/bin/false joey : TTY=pts/6 ; PWD=/home/joey ; USER=root ; COMMAND=/sbin/modprobe -r tpm_tis tpm joey : TTY=pts/6 ; PWD=/home/joey ; USER=root ; COMMAND=/sbin/modprobe tpm_tis force=1 tpm_tis tpm_tis: 1.2 TPM (device-id 0x3202, rev-id 5) tpm tpm0: Issuing TPM_STARTUP tpm tpm0: [Hardware Error]: Adjusting reported timeouts: A 10000->10000us B 10000->10000us C 0->752000us D 0->752000us ``` >> So do you have an idea, what “ACPI requirements” changed in the `tpm` >> module >> since Linux 3.16 to be loaded automatically? > > We added direct ACPI binding to the driver in addition to PNP, so if > you have an ACPI table it goes down that path and does some additional > validation of what is in the TPM. The BIOS must provide a > acpi_dev_resource_memory and a ACPI_SIG_TPM2 for the ACPI entry at a > minimum. Is it correct, that this is added in/for 4.11, so just recently? Testing with Linux 4.10.8, everything is detected just fine. ``` $ journalctl -k -o cat | grep -i tpm tpm_tis 00:08: 1.2 TPM (device-id 0x3202, rev-id 5) tpm tpm0: A TPM error (38) occurred attempting to determine the timeouts tpm tpm0: Issuing TPM_STARTUP tpm tpm0: [Hardware Error]: Adjusting reported timeouts: A 10000->10000us B 10000->10000us C 0->752000us D 0->752000us ``` > There are FW_BUG prints if those fail, so check your dmesg closely? > > http://lxr.free-electrons.com/source/drivers/char/tpm/tpm_tis.c#L250 > > If not, can you annotate in some printk's into tpm_tis_acpi_init and > recompile/re-test? If nothing comes to mind with the new information above, then I could do that. But I don’t know, if I’ll have time in the next two weeks for that. Kind regards, Paul ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ tpmdd-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/tpmdd-devel
