Hi,
I have a question related to lm-sensors and in particular fan control.
I've tried to find
a solution in many places online but with no luck, I think the people
at
lm-sensors will be the last place I look.
I recently installed Ubuntu Karmic 9.10 (dual boot) on a Vista Acer
Aspire 3810t laptop. Processor and chipset specs are:
---------------------------------------------------------
* - Intel® Core™2 Solo ultra low voltage processor SU3500
* - Mobile Intel® GS45 Express Chipset
Power:
* ACPI 3.0 CPU power management standard: supports Standby and
Hibernation power-saving modes, 62.16 W 5600 mAh 6-cell Li-ion
battery pack: Acer PowerSmart 3-pin 65 W AC adapter, ENERGY
STAR® 5.0
----------------------------------------------------------
Under Ubuntu 9.10 there appears to be a significant increase in the
fan
operation. Both when the laptop is plugged in and unplugged the fans
operate almost
constantly and at a strong speed. Since this did not happen under
Vista
and is quite bothersome, I started looking around for a solution.
I installed the "Sensors Applet on the gnome panel" but that only
gives
me temperature readouts (the Core0 temp is always around 41 C, with
the
fan spinning all the time).
I then installed "coretemp" through Synaptic, "lm-sensors", ran
"sensors-detect" (I have pasted the output of sensors-detect after the
end of the email as it is quite long). After that I ran "sensors" on
the
Terminal. This is what I got:
------------------------------------------------------------
cpitz-virtual-0
Adapter: Virtual device
temp1: +26.8°C (crit = +127.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +42.0°C (high = +100.0°C, crit = +100.0°C)
------------------------------------------------------------
Thus, no readouts for voltages or fan speeds.
After that I tried running "pwmconfig" through the terminal, to
receive:
----------------------------------------------------------------------
/usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed
----------------------------------------------------------------------
My knowledge is limited and I could not find
any solutions to making the fan spin properly, that's why I decided to
ask you guys last.
I should mention that I use kernel 2.6.31-16-generic, Grub2(beta-4),
my
Acer laptop BIOS is 1.17 (the most recent one), and that inside the
BIOS
there are no options for fan speeds or voltages.
If anyone can provide any information as to what the problem is it
would
be hugely appreciated.
I paste the contents of "sensors-detect" command below. Thanks,
Thomas
-----------------------------------------------------------------------
(contents of "sensors-detect'):
"We can start with probing for (PCI) I2C or SMBus adapters.
Do you want to probe now? (YES/no): y
Probing for PCI bus adapters...
Use driver `i2c-i801' for device 0000:00:1f.3: Intel ICH9
We will now try to load each adapter module in turn.
Load `i2c-i801' (say NO if built into your kernel)? (YES/no): y
Module loaded successfully.
If you have undetectable or unsupported I2C/SMBus adapters, you can
have
them scanned by manually loading the modules before running this
script.
To continue, we need module `i2c-dev' to be loaded.
Do you want to load `i2c-dev' now? (YES/no): y
Module loaded successfully.
We are now going to do the I2C/SMBus adapter probings. Some chips may
be double detected; we choose the one with the highest confidence
value in that case.
If you found that the adapter hung after probing a certain address,
you can specify that address to remain unprobed.
Next adapter: intel drm CRTDDC_A (i2c-0)
Do you want to scan it? (YES/no/selectively): y
Next adapter: intel drm LVDSDDC_C (i2c-1)
Do you want to scan it? (YES/no/selectively): y
Client found at address 0x28
Probing for `National Semiconductor LM78'... No
Probing for `National Semiconductor LM78-J'... No
Probing for `National Semiconductor LM79'... No
Probing for `National Semiconductor LM80'... No
Probing for `Winbond W83781D'... No
Probing for `Winbond W83782D'... No
Probing for `Winbond W83627HF'... No
Probing for `Winbond W83627EHF'... No
Probing for `Winbond W83627DHG'... No
Probing for `Asus AS99127F (rev.1)'... No
Probing for `Asus AS99127F (rev.2)'... No
Probing for `Asus ASB100 Bach'... No
Probing for `Analog Devices ADM1029'... No
Probing for `ITE IT8712F'... No
Client found at address 0x50
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... No
Probing for `EDID EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)
Next adapter: intel drm HDMIB (i2c-2)
Do you want to scan it? (YES/no/selectively): y
Next adapter: DPDDC-B (i2c-3)
Do you want to scan it? (YES/no/selectively): y
Next adapter: DPDDC-D (i2c-4)
Do you want to scan it? (YES/no/selectively): y
Next adapter: SMBus I801 adapter at 3000 (i2c-5)
Do you want to scan it? (YES/no/selectively): y
Client found at address 0x50
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... No
Probing for `EDID EEPROM'... No
Client found at address 0x52
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... No
Probing for `EDID EEPROM'... No
Some chips are also accessible through the ISA I/O ports. We have to
write to arbitrary I/O ports to probe them. This is usually safe
though.
Yes, you do have ISA I/O ports even if you do not have any ISA slots!
Do you want to scan the ISA I/O ports? (YES/no): y
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM78-J' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Probing for `IPMI BMC KCS' at 0xca0... No
Probing for `IPMI BMC SMIC' at 0xca8... No
Some Super I/O chips may also contain sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): y
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Fintek'... No
Trying family `ITE'... No
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Fintek'... No
Trying family `ITE'... No
Some south bridges, CPUs or memory controllers may also contain
embedded sensors. Do you want to scan for them? (YES/no): y
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD K10 thermal sensors... No
Intel Core family thermal sensor... Success!
(driver `coretemp')
Intel AMB FB-DIMM thermal sensor... No
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `coretemp' (should be inserted):
Detects correctly:
* Chip `Intel Core family thermal sensor' (confidence: 9)"
--------------------------------------------------------------------
--
You received this message because you are subscribed to the Google Groups "Trac
Users" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/trac-users?hl=en.
