Adrian, Thanks for the feedback. I have updated the wiring diagram to include setting the menu option in the TH-G71.
Larry K7YBZ --- In [email protected], "Adrian Miura" <adrianmi...@...> wrote: > > Thanks for the info. I did recheck the cable interface and when that did not > correct the problem I fiddled with the menu settings. Turns out menu option > 15 "trancever control" needs to be set to "off" for the OT2 to trigger the > PTT. > Hope this helps others with a TH-G71 > > Adrian > KD5HTZ > > --- In [email protected], "k7ybz" <k7ybz@> wrote: > > > > Adrian, > > > > You can test the PTT by removing the radio connector from the OT2 and > > shorting pin 3 (PTT) to pin 6 (GND). That should key the TH-G71. If it > > doesn't, recheck the wiring. If the wiring is correct, then either the > > diagram in the TH-G71 manual is incorrect or incomplete. > > > > If the TH-G71 does key up then make sure the HT jumper in the OT2 is open. > > > > I updated the wiring diagram in the files section to include that note > > about the HT jumper and added annotation to the pins on the OT2 radio > > connector block. > > > > Earlier this year there was someone else who was having the same problem. > > There was no additional information on whether the problem was found. > > > > Larry > > K7YBZ > > > > --- In [email protected], "Adrian Miura" <adrianmiura@> wrote: > > > > > > I have confirmed the cable pin outs match the diagram posted for the > > > TH-G71. > > > > > > I can receive data but cant get the OM2 to trigger the PTT to transmit > > > my location. > > > > > > Any help would be greatly appreciated > > > > > > Adrian Miura > > > > > > KD5HTZ > > > > > >
