Thanks for the response, I have it on an outside antenna known to be good, checked the adpater did not see anything there but will try another. I wonder if there is a filter or something in the default settings??
Increased max range to 200 did not seem to change things, just seems to me if I can hear the data burst on my HT on the same frequency I should see some message from the T2-301 when monitored in hyper terminal? In [email protected], Scott Miller <sc...@...> wrote: > > The RX performance on the T2-301 has actually been consistently better > than any other T2 model, so I'm surprised it's not working well for you. > You're sure the antenna connection is good and everything? > Unfortunately with the 301 it's not so convenient to tap into the audio > output to monitor what it's hearing. > > Scott > > w6cjq wrote: > > > > > > > > Hi so I am a proud new owner of a T2-301 Prior to this I was using a > > west mountian sound card interface with a FT8800. So here is what I have > > noticed. I set the T2-301 up and got it talking through the com port on > > my computer. I use Ui View 32 and noticed that I was not seeing a lot of > > traffic. I turned on my HT and heard a lot of traffic on 144.39 but the > > T2-301 only seems to pass about every 5th or so transmission to UI-View > > 32. The stations do show up on the map and I can transmit a query > > through the T2-301 it just seems to be real selective about what it here > > and sends to the com port. > > > > I also monitored the unit in hyper terminal and the same amount of > > traffic appeared > > > > Any thoughts on this?? > > > > >
