Nigel VE1NPS wrote... > Changed my configuration on the T2 from every 2 minutes beaconing to > using Smart Beaconing. Probably did something wrong but it appears > that normal time frame beaconing is negated? Although Smart Beaconing > appears to be working, anything in the normal time box is "greyed" > out, consequently normal beaconing appears to be happening way to > often, possibly every minute. Correct???
I'm glad to hear that you changed to SmartBeaconing. When SmartBeaconing is enabled, the normal time settings in the GUI will be greyed out. Click on SETTINGS beside SmartBeaconing to see your settings. In the "at speeds between" settings, enter something like 5-10 kmh for the slow speed and 80-90 kmh for the fast speed, and below there something like 600-1800 secs for the slow rate and 60-90 seconds for the fast rate. Transmit when turning more than something like 20-30 degrees, and no more often than e.g. 10 seconds. That should do it. If you are using a terminal program to enter the settings instead of the GUI (otwincfg.exe), the above would be something like... INT 90 SMART 10 90 600 20 10 73 es cul - Keith VE7GDH -- "I may be lost, but I know exactly where I am!"
