Thank you
n9inl-
-- In [email protected], Scott Miller <sc...@...> wrote:
>
> Here's the pinout for using port A for WS2300 mode:
>
> WS23xx OT2m
> 2 2
> 3 3
> 4 5
> 7 4
>
> For port B, I think you want pins 8 and 7 rather than 2 and 3.
>
> n9inl wrote:
> >
> >
> > I set B to auto and nothing changed. I'm using the cable that comes with
> > the weather station and can't find any schematic for it in the manual Tom
> >
> > - In [email protected] <mailto:tracker2%40yahoogroups.com>, Scott
> > Miller <scott@> wrote:
> > >
> > > I'd set B to AUTO, not flow. How do you have it wired? It's a little
> > > weird since it doesn't use the normal ground return.
> > >
> > > Scott
> > >
> > > n9inl wrote:
> > > >
> > > >
> > > > Hi, I'm trying to set up a OT2 and a LaCrosse 2315 weather station.Im
> > > > testing it using my home station so I know the weather station is
> > > > putting the data out.I get the station beacon but the weather data
> > stays
> > > > blank.
> > > >
> > > > Serial settings:
> > > >
> > > > A 2400 ws2300
> > > >
> > > > B 2400 flow
> > > >
> > > > tx audio 50%
> > > >
> > > > tx delay 32
> > > >
> > > > any help would be appreciated Thanks Tom
> > > >
> > > >
> > >
> >
> >
>
