I connect my T2 to a Phoenix SX and draw the power from it and run it right into the radio port with the rest of the radio connections. :) Best regards, Fred N7FMH
_____ From: [email protected] [mailto:[email protected]] On Behalf Of Tom Hayward Sent: Tuesday, August 04, 2009 01:47 To: [email protected] Subject: Re: [tracker2] Powering a Tracker2 > I have an opentracker+ and I know it gets it's power from the serial/ radio > connector. Can the Tracker2 be powered in the same way? Or does it need > power to the separate connection? Yes, the Tracker2 can be powered through the radio port, pin 7, same at the OT+ I'm running a Tracker2 this way now. My radio has 13.8V output available on the accessory connector, so I'm using that to power the Tracker2. I've got RX audio, TX audio, PTT, 13.8V, and Ground all coming from the radio into the serial port on the Tracker2 for a one-cable digipeater. Tom KD7LXL
