It needs to be set to Garmin, not auto. Baud rate and autobaud are ignored in Garmin mode. I really can't think of anything that'd make it work on port B but not port A.
Scott k7ybz wrote: > > > I have had a problem with the trackers and nuvi 350's we are using on a > week long bicycle event, Cycle Oregon. I have not been able to get the > Nuvi 350 to run on Port A regardless of the OT2M settings: Auto or > Garmin, 9600, w/wo autobaud. I did make sure that both ports were not > programmed the same and that profile switching was disabled. > > The only way I could get the Nuvi and Tracker to talk was through Port B > using a splitter cable. That was true for all four setups. I did have > one bad Garmin cable, but had a spare. I am not sure if there is > something with the build (latest release) or something else. > > I am posting this now, but this will be the last day with internet > service for the next seven days unless I get lucky with wireless > somewhere at an overnight site. This will at least give everyone some > time to think about what the problem might be. > > Larry > K7YBZ > >
