I put a SPST switch on the front of my OT2 case. One wire to ground, the other to a solder point near the rg-45 jack. Set Profile switching to Profile 1 jumper on, Profile 2 jumper off. Checked the "TX when switching to this mode" box on each profile. It will TX when profile is switched.
I use it to switch paths from just WIDE1-1 in Profile 1 to WIDE1-1,WIDE2-1 in profile 2. If I want to "spasti-track" switch back and forth. Alan --- In [email protected], "ddclarknm" <kj...@...> wrote: > > Hello Everybody. > > I am eagerly awaiting the arrival of my Tracker2. I am going to build a peripheral box to plug into the RJ-45 connector for switching profiles and a "transmit now" button. > > In the configuration software, there is a Jumper option. My first question is what levels do "On" and "Off" correspond to? +5V, GND, floating? > > Secondly, I assume that for the "transmit now" if I ground PIN 1 (i.e. with a momentary butt) the Tracker2 will transmit when I return PIN 1 to floating. Is this correct? > > Thanks and happy APRSing, > Dave KJ5KG >
