I am new to the Tracker2 Nuvi350 combination. The system seems to be working properly, I can send and receive messages via APRS, I see stations as waypoints on the map, etc. However I continue to get a message 'This accessory is not supported', and I have to cycle power to the Tracker2 to get the combination working again. Connectors all look good, rig is Yaesu FT-8800at low power (5W) and outside of the shack antenna, but still in the nearfield of the setup. Configuration or jumper setting? Any ideas?
Dave, KI4PSR (I tried to search for this problem but found no match, I apologize if this subject has previously been beaten to death <g>.)
