Larry, It'd be very useful to have some recordings of the traffic you hear that's getting garbled. Also, the output of the INFO command would be helpful - in particular, if the stack overflow flag is set.
Scott Larry Ewan wrote: > > > Keith, > Passall is off. Installed firmware is 55076. I'm seeing the garbled data > in the form of call signs having letters changed or dropped and also flakey > positions (e.g., out to sea many miles in the worst case). I have been > running it as a kiss TNC into UIview-32. I see the position issues on > UIview and APRS.FI but only the funny call signs on APRS.FI. > > The corrupted call signs are visible on APRS.FI in the 'stations near > N9JY-1' and I'm assuming my machine is the culprit although I don't see any > indication on the local UIview logs. Also have seen some sporatic fairly > long delays in digipeating (a minute or two), which I think might be an > OS/Uiview issue. > > Here's a config dump from the OT2m: > display > 1WIREWX OFF > ABAUD 4800 > ALIAS 1:WIDE1 2:WIDE2 3:TEMP > ALTITUDE OFF > ALTPATH OFF > AMODE AUTO > AUTHLIST > AUTOBAUD OFF > AUTOSAVE OFF > BBAUD 4800 > BMODE FLOW > CDINVERT OFF > CLIMB OFF > CNTRESET OFF > COMMENT - PSJ Fill-in > COMPRESS OFF > COUNTER OFF > CUSTSYM OFF > DAO OFF > DIGI ON > DIGIID 1:ON 2:ON 3:ON 4:ON 5:ON 6:ON 7:ON 8:ON > DUPETIME 10 > DOUBLE OFF > EXTSQL OFF > EXTTEMP OFF > FAHRENHT OFF > FILTER OFF > GPSDATA OFF > HALFSLOT OFF > HBAUD 1200 > HEADERLN OFF > HOPLIMIT 1:1 2:1 3:5 4:0 5:0 6:0 7:0 8:0 > INTERVAL 0 > LVINHIBIT 0 > MAXRANGE 0 > MONITOR ON > MYCALL N9JY-1 > NICE 0 > OUTPUT1 OFF > PASSALL OFF > POSITION 2829.07N 08048.17W > POWER ON > PREEMPT 1:OFF 2:OFF 3:OFF 4:OFF 5:OFF 6:OFF 7:OFF 8:OFF > PTTINPUT OFF > PATH WIDE2-2 > PROPWPT OFF > PWAUTH OFF > QUIET 16 > REARM 250 > RETRIES 6 > RETRYTIME 7 > REQALL OFF > RING OFF > SCRIPT OFF > SECRET 0 > SHAREDPTT OFF > SLOT 0 > SMARTBCON OFF > SWDCD ON > STATUS 0 > SYMBOL /# > TELEMETRY 0 > TEMP OFF > TEMPADJ 0 > TIMEHMS OFF > TIMESLOT OFF > TIMESTAMP OFF > TRACE OFF > TXDELAY 25 > TXLEVEL 199 > TXNOFIX ON > TXONCHG OFF > USEALIAS 1:ON 2:OFF 3:OFF 4:OFF 5:OFF 6:OFF 7:OFF 8:OFF > VELOCITY OFF > VOLTAGE OFF > WAYPOINTS OFF > WPTLEN 9 > > See anything I missed? > > Larry N9JY > > On 10/25/09 8:48 AM, "Keith VE7GDH" <[email protected] > <mailto:ve7gdh%40yahoo.com>> wrote: > > > Larry N9JY wrote... > > > >> I'm getting a lot (maybe as many as 10%) garbled call sign decodes > >> using three different radios on my OT2m... > > > > Garbled? Do you by any chance have PASSALL turned on? What are > > you using to view the garbled decodes? Perhaps you could post a few > > examples. Have you tried upgrading to the latest firmware? > > > > 73 es cul - Keith VE7GDH > > -- > > "I may be lost, but I know exactly where I am!" > >
