I think I have a 9 volt adapter. so I am all set. *** Found the problem
1) I was sending "-- int 120" 2) The correct message is "--int 120" put an extra space in there and cause problems with commands. *** --- In [email protected], Scott Miller <sc...@...> wrote: > > Hi Kevin, > > Those commands should work. I'd start by clearing out the outbox on the > nuvi to make sure the T2 isn't getting confused by old messages stuck in > the queue. > > I just came across your cable return - it wound up in the wrong place. > Did you ever get the 9-volt adapter, or do you still need one? > > Scott > > Kevin Jensen wrote: > > > > > > My tracker2 will accept commands. It accepts the "--smart on" command > > to activate the snartbeaconing. I can also get the tracker2 status, > > by sending that message. > > > > When I use my Nuvi 350 to send the command > > > > "--interval 120" > > > > The Tracker2 responds with an "invalid command" message > > > > Also when I send the command > > > > "--digi on" > > > > To turn the digipeater system on, I get the same response of "invalid > > command". > > > > So what am I doing wrong? These are printed commands, on the Tracker > > 2 - Nuvi 350 cheat sheet stored here in the data files section. Is > > the chj=eat sheet hopelessly out of date? Does someone have the > > current command set? >
