i have found from doing a lot of playing around with service montor 2.75 is the best for being herd. i fianlly gave in today and placed a big order with Argent Data Systems. K7CDL Ron Swart
--- In [email protected], "Fred Hillhouse" <fmhillho...@...> wrote: > > 4) I can hear the packets fine with my stand alone HT radio, with APRS. They > should like everyone elses packets. But maybe I do need to adjust the > volume settings (what is that command?) so that the modulation is improved. > Maybe I am undermodulating the packet, with my audio from the TRACKER? > > > My guess is that under modulating the packet is rarely the problem. In > actually the greatest fault is too much modulation. More means better, > right? No. Many directions say to start at max and work down until the > signal sounds good again. I have never been successful doing that. I can't > hear the difference between an over modulated signal to one that is good. > > My method of setting the output is to turn the TXLEVEL to 0 and work up from > there. When I hear a signal, I stop and that is usually good. I have bumped > it up a couple of levels but I have not found it to be detrimental. What is > a 'good signal' to me? Glad you asked. I listen with another radio and when > I can hear the audio, I am happy. > > You are better off not being as high as 3.5 kHz, than being over it. > > I did recently get a deviation meter and will have to go in a measure my > current settings. I am curious where they really ended up. > > > Best regards, > > Fred >
