I modified the Tracker2 configuration but I'm still getting what appear to be position packets. I might be mistaken. My APRS Elmer is in Canada on business and I'm new to this APRS stuff.
2009-11-02 21:39:27 UTC: W4SNA-2 <http://aprs.fi/?c=raw&limit=&call=W4SNA-2> >APOT21,WIDE2-2,qAR,KF4VTT <http://aprs.fi/?c=raw&limit=&call=KF4VTT> :!3622.65N/08021.86W_ 2009-11-02 21:39:27 UTC: W4SNA-2 <http://aprs.fi/?c=raw&limit=&call=W4SNA-2> >APOT21,WIDE2-2,qAR,KF4VTT <http://aprs.fi/?c=raw&limit=&call=KF4VTT> :!3622.65N/08021.86W_044/000g...t055p000h70b10181T2WX 2009-11-02 21:44:30 UTC: W4SNA-2 <http://aprs.fi/?c=raw&limit=&call=W4SNA-2> >APOT21,WIDE2-2,qAR,W4DEX <http://aprs.fi/?c=raw&limit=&call=W4DEX> :>!3622.65N/08021.86W_PHG5750/Wide1-1, WX Sauratown Mtn, NC 2009-11-02 21:44:30 UTC: W4SNA-2 <http://aprs.fi/?c=raw&limit=&call=W4SNA-2> >APOT21,WIDE2-2,qAR,W4DEX <http://aprs.fi/?c=raw&limit=&call=W4DEX> :!3622.65N/08021.86W_ 2009-11-02 21:44:31 UTC: W4SNA-2 <http://aprs.fi/?c=raw&limit=&call=W4SNA-2> >APOT21,WIDE2-2,qAR,KF4VTT <http://aprs.fi/?c=raw&limit=&call=KF4VTT> :!3622.65N/08021.86W_044/000g...t055p000h70b10181T2WX 2009-11-02 21:49:33 UTC: W4SNA-2 <http://aprs.fi/?c=raw&limit=&call=W4SNA-2> >APOT21,WIDE2-2,qAR,WW4FL-1 <http://aprs.fi/?c=raw&limit=&call=WW4FL-1> :!3622.65N/08021.86W_ 2009-11-02 21:49:33 UTC: W4SNA-2 <http://aprs.fi/?c=raw&limit=&call=W4SNA-2> >APOT21,WIDE2-2,qAR,W4DEX <http://aprs.fi/?c=raw&limit=&call=W4DEX> :!3622.65N/08021.86W_044/000g...t054p000h71b10181T2WX Here is the Tracker2 configuration screen. --- In [email protected], "k7ybz" <k7...@...> wrote: > > Tom, > > In OTWINCONFIG select "Don't require GPS fix' in the 'Position' section. > > Larry > K7YBZ > > --- In [email protected], "w4sna" w4sna@ wrote: > > > > WD4LSS and I installed a mountain top APRS WX station at my 6M repeater site. The Tracker2 is sending WX and status packets as expected. When the WX packet is sent the Tracker2 also sends a position packet. > > > > Since the station is fixed and the position info is in the WX packet is it necessary to send the additional position packet? If not, how is the position packet disabled so only the WX and status packets are sent? > > > > Tom - W4SNA > > >
