I probably will start a group.  What email did you send to that bounced, 
and what message did it bounce with?

It has wind speed, direction, and rain sensors on a mast, and inside the 
box it has temperature and barometric pressure, and optionally humidity.

So far the only external sensor it supports is the DS18S20 1-wire 
temperature sensor.  I'll be adding support for a couple of others, and 
eventually you'll be able to configure it to indicate which sensor is 
what (e.g., inside humidity, outside humidity.)

I've been putting some work into the voice function because I think 
that'll open up some new markets for it, and nothing else affordable has 
that.  For only running at 8192 samples/second it sounds very good, but 
it does have a considerable advantage over the SR1 repeater (from which 
I borrowed a fair amount of code) in that the samples can all be 
recorded at 44 kHz, 16 bits/sample, and then normalized, filtered, and 
resampled on a PC with no constraints on DSP horsepower.

Scott

Ronny Julian wrote:
>  
> 
> I tried asking you off list but the email bounced.  What sensors (wind 
> speed, direction, rain) will be available for it?  Are you going to 
> start a new separate Yahoo group for it?
> 
> 
> ------------------------------------------------------------------------
> *From:* Scott Miller <[email protected]>
> *To:* [email protected]
> *Sent:* Mon, November 2, 2009 4:33:03 PM
> *Subject:* Re: [tracker2] Ultimate birthday gift.
> 
> Glad to hear it.  21 of the ADS-WS1 v1.1 boards came in today.  Got two
> built, minus the terminal blocks and humidity sensors that I don't have
> on hand.  Some of the voice samples will need to be re-recorded, but
> it's getting there.
> 
> I'm going to have to nail down the feature set for the first firmware
> release and get it finished up.  If I wait until I've got all of the
> planned features implemented, it'll be May before I ship anything.
> 
> Scott
> 
> Jon wrote:
>  > 
>  >
>  >
>  >
>  >  >And of course, everyone's going to buy an ADS-WS1 weather station,
>  >  >right? =]
>  >  >
>  >  >Scott
>  >
>  > Yup,
>  > de John
>  > EI7IG
>  >
>  >
> 
> 
> 
> ------------------------------------
> 
> Yahoo! Groups Links
> 
> 
>     (Yahoo! ID required)
> 
>     mailto:[email protected] 
> <mailto:[email protected]>
> 
> 
> 

Reply via email to