Yes, D4 is a bicolor, common-cathode LED. It looks like I did include a
pull-up resistor for the CFG input on pin 34, but neglected to route it
to a convenient pad. You can connect to pin 34, or to the resistor
(R29) immediately adjacent to it.
Scott
Mike wrote:
> Hello Scott,
> I'm going to place my T2-301 in another box with a Tx/Rx LED, a 'Beacon
> now' push button and profile select switch on the front.
>
> 1. Is D4 as marked on the T2 board a connection point for a Tx/Rx LED?
> 2. Is there a connection point for a profile switch or do I have to
> connect a wire direct to the processor chip, pin 34?
>
> TIA.
> Mike, VK2IN.
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/tracker2/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/tracker2/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:[email protected]
mailto:[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
