The T2-135 doesn't have enough 5v power available to run the GPS 18 -
you'd have to plug it in to the front panel data port. If you've got
the GPS 18 powered through some other connection, then all you need on
the 135 is a male-male null modem adapter.
Scott
Pete Lilja wrote:
>
>
> I have a Garmin 18 with an Argent supplied DB-9 connector that connects
> and works very well with an OT+ and an HT. I also have a T2-135
> internal to an Alinco DR-135 connected to a Nuvi 350 that also works
> very well.
>
> I can foresee wanting to connect the Garmin 18 to the Alinco with the T2
> board. Will the Garmin 18 cable set-up for the OT+ connect directly to
> the T2-135 in the Alinco and work to xmit position packets? Or do I
> need to make a new 'patch' cable between the Garmin 18 cable and the
> DB-9 on the back of the Alinco?
>
> Thanks,
>
> Pete
> KCØGPB
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/tracker2/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/tracker2/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
