I'll give it a try, but I suspect in that case it was either a connector problem or a PCB crack or something. Yours is decoding *most* of the traffic, but not as much as it does on one of my radios.
Scott Rudy wrote: > > > HEADS UP ON THIS SCOTT!! Could you check my radio/tnc which is on your > bench for this solution? > > Who would have thunk it. > > Happy Dead Bird Day to the 'mericans. We kill the bird in October up > here in VE land. > > --- In [email protected] <mailto:tracker2%40yahoogroups.com>, > Randy Love <rlov...@...> wrote: > > > > I had this issue on a T2-135 also. I'm not sure of the exact problem, but > > when I inverted the board ( put the component side toward the radio > > components ), it decoded better. Significantly better. Not sure if it > was a > > connector issue or what exactly, but by putting the board into the DR-135 > > with solder side toward the case, and careful placement of insulating > > material around the T2-135 board, it sprang to life. It would only decode > > about 5% of the traffic before the inversion. The percentage jumped to > > around 80% afterwards. It's 80% because there are some maladjusted > trackers > > in the area, but I don't worry about them because the local digi > relays them > > just fine, and the local digi is now 100% decode. > > > > YMMV > > > > 73, > > Randy > > WF5X > > > > On Fri, Nov 13, 2009 at 3:30 AM, Rudy Benner <ben...@...> wrote: > > > > > > > > > > > My board is v1.2 also and still has the problem. > > > > > > > > > > > > No virus found in this outgoing message. > > > Checked by AVG - www.avg.com > > > Version: 8.5.425 / Virus Database: 270.14.62/2499 - Release Date: > 11/12/09 > > > 14:33:00 > > > > > > > > > > ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/tracker2/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/tracker2/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
