Hello. We had similar problem a lot of time ago. Please change configuation like: 1-st position - WIDE7 2-nd position - WIDE6 3-rd posit. WIDE5 4 - WIDE4 5 - WIDE 3
WIDE7 ,6 ,5, 4 hoplimit must be 0 (without hoplimit) WIDE hoplimit must be 3 IF you change for this schemat than your DIGI will working OKay. IF you want that your DIGI will work only like WIDE1-1 than write only alias on first position WIDE1 without hoplimits. 73's SP1QXN Maciej James Ewen <[email protected]> napisał(a): > Okay, time to ask a silly question... > > We know that the way Scott has implemented the hop limits in the OT2 > allows n values greater than the hop limit to be digipeated when the N > value is less than or equal to the hop limit. > > i.e > alias 1 WIDE > hoplimit 1 3 > > will digipeat > > WIDE3-3 and lower as below > WIDE3-2 > WIDE3-1 > which we should expect. > > It also digipeats > > WIDE7-3 and lower > WIDE6-3 and lower > WIDE5-3 and lower > WIDE4-3 and lower > > While Scott feels otherwise, I feel that this is an error in > programming allowing paths beyond the hop limit to still be handled, > even though we are attempting to inhibit exactly that behaviour with > the hop limit. > > This is especially prevalent when attempting to set up a WIDE1-1 > digipeater. Any packet on its last hop will activate what should only > be a first hop digipeater. > > I have seen suggestions for setting the alias to a specified alias of > WIDE1 and a hop limit of 1. Does anyone have evidence that this does > in fact act upon WIDE1-1 paths? > > If an alias of WIDE1 would work, it should also work for an alias of > WIDE3, and a hop limit of 3. I set SPLSTD up the other day with WIDE3 > as an alias, and a hop limit of 3. I drove out in the area, and did > not get digipeated at all by the digi... > > Of course, I think I just found the flaw in my analysis... I'm using > an outgoing path of WIDE1-1,WIDE2-2 neither of which will match > WIDE3-N... > > Auuugggghhhh! I hate it when I outsmart myself! Off to the drawing > board... > > Of course you can all feel free to smite me about the head and > shoulders... Anyone using a specified n value on their WIDEn > digipeaters? > > James > VE6SRV ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/tracker2/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/tracker2/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
