Dear Scott, Well I couldn't tell you, what I can tell you is I removed the EQ jumper from the problematic tracker2 and its working like a charm, was it that or the fact that I replaced the firmware, reconfigured everything, blasphemed like a drunken sailor,told it I was going to sell it on the next ham fair to a ham who would gut it open for parts... I don't know but it seems to be working fine now!... hehehehe
But I think it was the jumper... Thanks for your prompt help and keep up the amazing work! 73 Mike Maciel CU3HY --- In [email protected], Scott Miller <sc...@...> wrote: > > And does the other unit have the EQ jumper in place? > > Scott > > mmaciel wrote: > > > > > > Dear Scott, > > > > Yes EQ jumper is in place, brought the Tracker2 down to the shack to > > give it a thorough look at, up in the site is kinda hard, so i got it > > here with me... > > > > 73 > > > > Mike "CU3HY" > > > > --- In [email protected] <mailto:tracker2%40yahoogroups.com>, > > "mmaciel" <mike@> wrote: > > > > > > Sadly no... Today I'll go up the mountain again and try it... > > > > > > thanks for the thought. Will let you know how it went... > > > > > > 73 > > > > > > Mike > > > > > > --- In [email protected] <mailto:tracker2%40yahoogroups.com>, > > Scott Miller <scott@> wrote: > > > > > > > > Have you tried changing the EQ jumper? > > > > > > > > Scott > > > > > > > > mmaciel wrote: > > > > > > > > > > > > > > > I have two T2 devices on two separate locations, one is CU3URA-1 the > > > > > latest T2 model and the other one is CU3URA-2 the model without > > led's in > > > > > the front. These are both setup as Digipeaters. > > > > > > > > > > Now CU3URA-1 works perfect, digipeats everything fine, the other one > > > > > hardly digipeats anything, even if your at a rock trowing > > distance some > > > > > it just wont digipeat, my kenwood d700 work fine, it sends out > > all my > > > > > data, others with opentrackers and such no go,we all use > > wide1-1,wide2-2 > > > > > in all our mobile setups, both T2's are up with the latest firmware, > > > > > they both have the same setup except for different SSID's and > > location, > > > > > but still CU3URA-2 nothing, swapped radios, did it all... no > > go... what > > > > > I'm I missing? > > > > > > > > > > could it be because different protos?? > > > > > CU3URA-1 was bought brand new, cu3ura-2 was bought off ebay, that it? > > > > > > > > > > Sorry for the ultra newbie question, > > > > > > > > > > 73's to all and all the best from Azores Islands. > > > > > > > > > > CU3HY > > > > > > > > > > > > > > > > > > > > > >
