Definitely a head scratcher. :) Alrighty. I'll mull it over some more and see what else I can come up with.
Randy WF5X On Wed, Dec 2, 2009 at 5:49 PM, donmor46 <[email protected]> wrote: > > > > Here are the results from your suggestions Randy. > > New firmware downloaded and installed. (September 2 2009) > > With nothing hooked up but power, the three lights blink just once when the > power is applied and then nothing. No lights remain on. > > Connect the radio cable then power up and the lights all blink once, as > above, but the radio keys up and remains keyed. (Before, the lights would > keep cycling and the radio would key on and off) > > Thanks Randy for all your help. It is very much appreciated. > > Don > > > --- In [email protected] <tracker2%40yahoogroups.com>, Randy Love > <rlov...@...> wrote: > > > > Well, the only suggestion I have left is to reload the firmware and let > it > > load in the 'defaults' to overwrite the current programming, power it up > and > > see what happens. If it still does that endless loop, then it's pretty > much > > assured there is something wrong with the OT2 hardware itself. If not, > then > > the hardware should be good. > > > > Next, if the hardware checks good, I would reload your programming, power > it > > up, and see what happens. If it cycles then, it's in the programming > > somewhere. If not, I'm at a loss. Hook the radio back to it and see if > the > > cycling starts. > > > > Give that a try. Anyone else have other ideas if it still does that > cycling > > after these two test conditions? > > > > Randy > > WF5X > > > > >
