Hi Mark, I would like to hear more about the Phoenix install. I used a Phoenix until recently with my OT2. I will be running a FT1500 again mobile. The Phoenix is moving to a digi site (with the KPC3+). Thanks! Best regards, Fred
_____ From: [email protected] [mailto:[email protected]] On Behalf Of Mark Cheavens Sent: Thursday, December 17, 2009 21:35 To: [email protected] Subject: Re: [tracker2] Re: T2-135 Decode Performance (again...) And put the original in another radio that has a de-emphasis network (Fits easily in a GE Phoenix!) Mark KC5EVE At 07:27 PM 12/17/2009, you wrote: Thanks for the comments. I have a local event coming up at the end of February for which I really wanted to have an effective fill-in digi available. I used my existing board last year for the same event and it was OK but certainly less than ideal. Based on what I've heard here and in past posts as well, I've ordered a new board and will keep the original one as a spare. I had actually started considering acquiring a KPC-3 for use with another radio, but this arrangement is so compact that it's hard to beat (providing it works satisfactorily - and it sounds as if the new board will be noticeably better). Gil, WB2UTI --- In track...@yahoogroup <mailto:tracker2%40yahoogroups.com> s.com, "Gil" <gcha...@...> wrote: > > I have a T2-135 board that is probably several years old now installed in a DR-135 Mk II that was new at just about the same time. I know there's been past discussion about the decode performance of these units and I'd just like to get updated on the status of any fixes. I think there was talk of some hardware changes to better shape the audio, but I don't know where that stands now. > > I do have the latest firmware build installed (55076) and today I was running my DR-135 system next to my other home system using a Yaesu FT-1500M and AGWPE and the home system is decoding many more transmissions than the Alinco. I'm using two identical antennas at the same height with just about the same transmission line lengths and quality. The Alinco gets most of the strong signals, but the weaker ones are not handled well. The radio hears them (the "meter" moves) but the board does not decode them. > > So, is there a practical fix for those of us who are a little hesitant about surface mount techniques? > > Gil Chapin, WB2UTI >
