this is not at all what is going on. I have a HT1C cable from byonics I have 
tried to hook up to my mobile. and I have a HT cable from RPC I have tried to 
use on my HT. these cables have worked for a TT4 and the opentracker but cant 
get the tracker2 to PTT at all on both rigs. the only time I can get the 
tracker2 to PTT on my mobile is if I turn on the HT jumper when hooked up to my 
mobile but then if I go under the config program and go under tuning and hit 
PTT it wont turn on the HT or the mobile rig. I know my cables are good because 
I used them on other trackers even used them on the opentracker. when I got the 
tracker2 it had a diffent firmware number and I upgraded that by the config 
program and I wonder if this might have done something. I know the gps is 
working right because I'm getting all stations to show and dispatch menu is 
showing on gps.
Ron

--- In [email protected], James Ewen <ve6...@...> wrote:
>
> On Wed, Dec 30, 2009 at 1:44 PM,  <wyoming_semi_dri...@...> wrote:
> 
> > it says firmware 55076 if that makes any diffent. yes I have tried to PTT
> > using both my HT cable I got from RPC and my mobile and it wont key up any
> > of them.
> 
> I would suggest taking a step back, and explaining what it is you are
> trying to do. You are talking about HT jumpers, HT cables and mobile
> rigs all in the same thread.
> 
> If you explain what it is you would like to do, and what it is that
> you have done, we might be able to spot a problem.
> 
> From your explanations so far, it sounds like you are trying to hook
> up a mobile radio using an HT cable, and telling the OT2 that you have
> an HT connected. That's not going to work for you. Sometimes duct tape
> won't solve every problem! 8)
> 
> You will need a cable that is appropriate for the FT-2700... I'll go
> out on a limb and suggest that a cable for a hand held radio is
> probably not going to work for you here.
> 
> We can toss ideas around for a long time, but if we get a better
> picture of what you want, and what you have done so far, we can
> eliminate a whole lot of useless suggestions.
> 
> James
> VE6SRV
>


Reply via email to