You'd use EXEC POWER ON and EXEC POWER 2.
Scott
ki6tsf wrote:
>
>
> Hello,
>
> I don't remember if this has been discussed already.
> Is it possible to control the power FET from scripting and how?
> I would like to have the radio powered on while in profile2 (moving)
> and off except during packet transmission while in progile1 (stopped)
>
> if profile2: turn on power
> if profile1: turn off power but leave "enable" and "delay=2" selected in
> the main config panel
>
> I could not see an obvious way to control power in the scripts.
>
> Thank you,
>
> Bernard KI6TSF
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/tracker2/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/tracker2/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
