Hi IZ4ISN, It might be useful to capture some data with Hyper Terminal prior to connecting to the OT2 and include it. It might provide a clue. Plus it will verify your cabling is correct. If you cannot capture data, then there might be a connection or baud rate issue. Best regards, Fred
_____ From: [email protected] [mailto:[email protected]] On Behalf Of IZ4ISN Sent: Thursday, February 04, 2010 13:58 To: [email protected] Subject: [tracker2] Re: Help!!!!! Help!!!! connection Traker T2m with Davis Vantage Pro2 for APRS --- In track...@yahoogroup <mailto:tracker2%40yahoogroups.com> s.com, Scott Miller <sc...@...> wrote: > > Never used one of the APRS loggers, and I haven't even seen the docs on > them. If someone wants to loan me a unit, I'll be happy to try it out. > > Scott > > w4sna wrote: > > > > > > > > > > The Davis APRS streaming logger responds to loop packet requests and > > other commands just like the serial version. The APRS logger reverts to > > streaming mode a set time after the last command. > > > > Theoretically the streaming logger should work with the T2. I have both > > types of loggers. The T2 communicates with the serial logger but doesn't > > communicate with the APRS streaming logger. Maybe Scott can explain what > > is going on. > > > > --- In track...@yahoogroup <mailto:tracker2%40yahoogroups.com> s.com <mailto:tracker2%40yahoogroups.com>, Ben > > Lindner-VK5JFK <vk5jfk@> wrote: > > > > > > I think the APRS logger should be OK as it is still serial. I stand to > > > be corrected on this though > > > > > > Ben > > > VK5JFK > > > > > > > > yes ok perfect but I can tell exactly how to set the T2?? I have seven so the T2 Serial port Mode at 9600 Davis Serial Port B Mode Davis 9600 surely you need to enable something else in T2 ??????? I tried and tried but nothing I can not get to communicate with the Davis T2. I tried and tried but nothing I can not get to communicate with the Davis T2. HELPPP HELPPP
