Sorry, my mistake. Go to findu and look at my messages (K5TAN-9). Message was retransmitted roughly every two minutes for 1.5 hours. It only stopped because I powered the system down to re-run the power and data cables to the Nuvi. Later tonight after finishing the rewiring I tried to get a VERSION report out of the system, but I had to delete the old message out of the outbox. Either RETRIES isn't working on messages or the Nuvi is re-sending the message to the OT2. I still think the Nuvi needs to handle a message retrying out as if it was acked by the receiving station to clear out the OUTBOX.
Al --- In [email protected], "awasc...@..." <awasc...@...> wrote: > > Scott, > > With the new Nuvi firmware, RETRIES appears to limit the transmissions where > it wasn't with the old firmware. However, when a message is never acked and > retries out, it stays in the Nuvi outbox and subsequent messages are not > transmitted to the OT2. I think OT2 is not, but needs to, send something to > the Nuvi when a message retries out. I verified this by sending a message to > a station that was not on the air. It retried out. I then tried a VER > command and got no response until I went in and manually deleted the previous > message from the outbox. > > Al > > > --- In [email protected], Al Waschka <awaschka@> wrote: > > > > I did not have the latest FW. I have now upgraded and will see how that > > works. > > > > --- On Thu, 2/18/10, Scott Miller <scott@> wrote: > > > > > > From: Scott Miller <scott@> > > Subject: Re: [tracker2] Messaging anomalies > > To: [email protected] > > Date: Thursday, February 18, 2010, 11:44 AM > > > > > > Have you checked to make sure you're running the latest nuvi firmware? > > They fixed a bug at some point that caused problems with message ACKs. > > > > Scott > > > > awaschka@ wrote: > > > > > > > > > Hi - > > > > > > I purchased an OT2m in October and have it hooked up with a Nuvi 350 via > > > the FMI cable purchased at the same time. I'm seeing some anomalies in > > > the messaging as follows: > > > > > > 1. On first few tries, I got back an indication that a sent message was > > > acknowledged. Haven't seen that lately. > > > > > > 2. A single receive message will come in and be displayed on the Nuvi > > > multiple times. > > > > > > 3. I sent a message yesterday afternoon and today, after over 50 > > > retries, the message is still being sent out. Retries is set to 6. > > > > > > 4. When I tried to queue the retries query, it wouldn't go out until I > > > cleared the old messag in the outbox. It looks like the OT2 is not > > > acking the message to the Nuvi so the Nuvi keeps sending it. > > > > > > Any ideas? > > > > > > Thanks, > > > > > > Al K5TAN > > > > > > > > > > > > > > ------------------------------------ > > > > Yahoo! Groups Links > > >
