When the tracker tries to send do you hear the audio on the other radio? In the same room with a 10/25 watt radio you may be overloading the receive on the other radio. Make sure that you're on low power, and space the mobile radio's antenna further away, or put it on a dummy load.
p On 3/9/2010 9:46 PM, Craig Leventhal wrote: > I was trying to send to another station I had setup for testing in the same > room. > The Tracker2 is is set for KI6WLP-2 and I was trying to send to a test > stations�KI6WLP-1 and KI6WLP-3 > > The second test staion is a Yaesu VX-8R hooked to a another brand Tracker. I > know the�second Tracker works because it shows�up on aprs.fi > > KI6WLP-1 is the ID assigned to another brand of tracker�which is hooked to > a�laptop running APRSIS32,�I also had the APRSIS32 software set for KI6WLP-3. > > I do see other stations showing up on the Nuvi 350 and they're in the > "Favorites" list.� > I tried send using the following: > > -KI6WLP-1 TEST > > and also > > -KI6WLP-3 TEST > > Also when the APRSIS32 software on the laptop�is in the RF�mode is can see > other APRS station�through the VX-8R, Tracker, and to the laptop. I think > maybe once I was able to send from the laptop using RF mode to the Tracker2 > and Nuvi 350. > > I thought I can send directly to another APRS station without going through a > digipeater, am I mistaken? > If they're in the same room for testing, could that be causing a problem? > > Craig - KI6WLP > > > ------------------------------------ > > Yahoo! Groups Links > > > >
