Hi Phil, You need NMEA for the IC-91AD and that is not readily available. But... I added a GTRANS to the inside of my OT2 and it works just fine. I added pictures to the Photos section I believe. I can provide more information if needed. The GTRANS converts the Garmin Protocol to NMEA which would allow you to use a Nuvi350 with just the IC-91AD if you wanted. BTW, if the IC-91AD uses the same data cable as the IC-U82, the Kenwood version of the GTRANS will not work. IIRC the TIP and RING are reversed. Best regards, Fred
_____ From: [email protected] [mailto:[email protected]] On Behalf Of liquid_squelch Sent: Thursday, April 01, 2010 14:59 To: [email protected] Subject: [tracker2] Sharing the OT2m's Nuvi 350 with D-Star ? Hi All I currently have my Nuvi-350 hooked up to my OT2m and it works great. I was wondering if I could split the serial port on the FMI before it gets to the OT2m and feed the GPS signal to my IC-91AD as well. Has anyone tried this? Can a GPS signal be split, or am I better off running a dedicated GPS to the DSTAR Radio? This is about all I can find with a quick Google search: http://www.icomamer <http://www.icomamerica.com/en/support/forums/tm.asp?m=2477&mpage=1&key= 80> ica.com/en/support/forums/tm.asp?m=2477&mpage=1&key=র and http://members. <http://members.cox.net/kb6oya/91AD_GPS.html> cox.net/kb6oya/91AD_GPS.html Thanks for the help.. I'm looking forward to adding DSTAR to my APRS setup. 73 Phil / w2lie
